Manual Vonroc CD507DC (page 5 of 44) (English, German, Dutch, French, Italian, Polish, Spanish)

763965

Zoom out

Zoom in

1/44

WWW.VONROC.COM

temperature range speciﬁed in the instructions.

Charging improperly or at temperatures outside

the speciﬁed range may damage the battery and

increase the risk of ﬁre.

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS FOR DRILLS

AND SCREW DRIVERS

a) Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold power tool by insulated gripping surfaces,

when performing an operation where the cut-

ting accessory may contact hidden wiring or its

own cord. Cutting accessory contacting a “live”

wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.”

d) Hold the machine with a ﬁrm grip. High

reaction torque can brieﬂy occur while driving

in and loosening screws.

e) Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

f) Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

g) Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the

direction switch to the middle position.

Unintentional actuation of the On/Off switch

can lead to injuries.

FOR THE CHARGER

Intended use

This screwdriver has an integrated lithium-ion

battery, which you can charge with the included USB

charging cable (USB-mains adapter not included).

a) The appliance is not to be used by persons (in-

cluding children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given super-

vision or instruction

b) Children being supervised not to play with the

appliance

c) Do not recharge non-rechargeable batteries!

d) During charging, batteries must be placed in a

well ventilated area!

e) Integrated batteries may only be removed for

disposal by qualiﬁed personnel. Opening the

housing shell can destroy the power tool. To

remove the battery from the power tool, press

the On/Off switch (6) until the battery is fully

discharged. Unscrew the screws on the housing

and remove the housing shell in order to remove

the battery. To prevent a short circuit, disconnect

the connectors on the battery one at a time and

then isolate the poles. Even when fully dischar-

ged, the battery still contains a residual capacity,

which can be released in case of a short circuit.

RESIDUAL RISKS

Even when the power tool is used as prescribed it

is not possible to eliminate all residual risk factors.

The following hazards may arise in connection with

the power tool’s construction and design:

a) Health defects resulting from vibration emission

if the power tool is being used over longer

period of time or not adequately managed and

properly maintained.

b) Injuries and damage to property to due to bro-

ken accessories that are suddenly dashed.

Warning! This power tool produces an

electromagnetic ﬁeld during operation. This

ﬁeld may under some circumstances

interfere with active or passive medical

implants. To reduce the risk of serious or

fatal injury, we recommend persons with

medical implants to consult their physician

and the medical implant manufacturer

before operating this power tool.

2. MACHINE INFORMATION

Intended use

This screw driver is intended for driving in and

loosening screws

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc CD507DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc CD507DC Manual

Product: