Manual Vonroc AG503AC (page 11 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

778559

Zoom out

Zoom in

1/88

WWW.VONROC.COM

a negative effect on the machine’s efﬁciency.

Change to a new wheel disc in good time.

Deburring (Fig. F)

An angle of inclination of 30° to 40° will

give the best results when deburring. Move

the machine back and forth using light

pressure. This will prevent the work piece

from discolouring or becoming too hot and

will avoid making groves.

Never use abrasive cutting discs for

deburring work!

Cutting (Fig. G)

For cutting, a special protection guard must

be used (not included).

Maintain ﬁrm contact with the work piece to

prevent vibration and do not tilt or apply pressure

and when cutting. Use moderate pressure when

working, appropriate to the material that is being

worked on. Do not slow down wheel discs by

applying sideways counter pressure. The direction

in which you want to cut is important. The machine

must always work against the direction of the cut;

so never move the machine in the other direction!

There is the risk that the machine will catch in the

cut causing kickback and that you will lose control.

Hints for optimum use

• Clamp the work piece. Use a clamping device

for small work pieces.

• Hold the machine with both hands.

• Switch on the machine.

• Wait until the machine has reached full speed.

• Place the wheel disc on the work piece.

• Slowly move the machine along the work piece,

ﬁrmly pressing the wheel disc against the work

piece.

• Do not apply too much pressure on the ma-

chine. Let the machine do the work.

• Switch off the machine and wait for the ma-

chine to come to a complete standstill before

putting the machine down.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt.

Remove very persistent dirt using a soft cloth mois-

tened with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals

such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc AG503AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 8.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc AG503AC Manual

Product: