738224

Voltcraft VC276 TRMS Manual

44
Zoom out
Zoom in
Previous page
1/152
Next page
44
5. Safety information
These instructions contain important information on how to use the multimeter correctly. Please
readthemcarefullybeforeusingthemultimeterforthersttime.
Damage caused due to failure to observe these instructions will void the warranty. We shall not be
liable for any consequential damage.
We shall not be liable for damage to property or personal injury caused by incorrect handling or
failure to observe the safety information! Such cases will void the warranty/guarantee.
• This device was shipped in a safe condition.
• We kindly request the user to observe the safety instructions and warnings contained in the enclosed
operating instructions so this condition is maintained and to ensure safe operation.
• Check that the measuring device is functioning correctly with a known source before using it.
• Theunauthorisedconversionand/ormodicationofthedeviceisnotpermittedforsafetyandapproval
reasons.
• Check that the measuring device is functioning correctly with a known source before using it.
• Consult a technician if you are not sure how to use or connect the device.
• Measuring instruments and their accessories are not toys and must be kept out of the reach of children.
• Always comply with the accident prevention regulations for electrical equipment when using the product
in commercial facilities.
• In schools, educational facilities, hobby and DIY workshops, the multimeter must be used under the
responsiblesupervisionofqualiedpersonnel.Thesameapplieswhenthemultimeterisusedbypeople
with reduced physical and mental capabilities.
• Before each measurement, always make sure that the meter is not set to a different measurement func-
tion.
• When using measuring probes without protective caps, measure-
ments between the multimeter and the earth potential must not ex-
ceed the CAT II measurement category.
• When taking CAT III measurements, the cover caps must be placed
on the probe tips (max. length of exposed contacts = 4 mm) to avoid
accidental short circuits. These are supplied with the device.
• The measuring probes must be removed from the measured object
every time the measuring range is changed.
• The voltage between the multimeter connection points and earth must never exceed 600 V DC/AC in
CAT III.
• Exercise particular caution when working with voltages higher than 33 V (AC) and 70 V (DC). Touching
electrical conductors with these voltages may cause a fatal electric shock.
• To prevent an electric shock, do not touch the connections/measuring points when taking measurements,
either directly or indirectly. When taking measurements, do not touch any area beyond the grip markings
on the test probes / test leads.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC276 TRMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC276 TRMS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info