738224

Voltcraft VC276 TRMS Manual

42
Zoom out
Zoom in
Previous page
1/152
Next page
42
3. Intended use
- Measures and displays electrical parameters in measurement category CAT III (up to 600 V). Complies with the
EN 61010-1 standard and all lower categories. The multimeter and accessories must not be used in the measuring
category CAT IV.
- Measures direct and alternating voltages up to 600 V
- Measures direct and alternating currents up to 10 A
- Frequency measuring up to 10 MHz
- Measures capacitance up to 60 mF
- Measuresresistanceupto60MΩ
- Measures temperatures from -40 to +1000 °C
- Continuitytests(<10Ωacoustic)
- Diode tests
- Non-contact 230 V/AC voltage detection (NCV)
The measurement modes are selected using the rotary dial. In many measurement ranges, measurement range
selection is automatic (except for continuity testing, diode testing and current measurement ranges).
Effective (True RMS) measurements are displayed when measuring AC voltages/currents with a frequency of up to
400 Hz. This ensures that sinusoidal and non-sinusoidal voltage/currents are measured accurately.
Negative polarity readings are indicated with the (-) sign.
The 10 A current measurement input is equipped with a ceramic high-performance fuse to protect against overloading.
The voltage in the measurement circuit must not exceed 600 V.
ThemA/µAmeasurementinputisequippedwithself-resettingPTCfuses.Inthecaseofoverload,thecurrentow
is limited and the measurement device is protected. This negates the need for fuse changes with this measurement
mode.
A low-impedance mode (LoZ) enables voltage measurement with reduced internal resistance. This suppresses phan-
tom voltages, which may occur in high-impedance measurements. Measurement with reduced impedance is only
permissible in measurement circuits of up to 250 V and for up to 3 s.
Themultimeterispoweredbyastandard9Vblockbatteries(type6F22oridenticalspecications).Onlyusebatteries
ofthespeciedtype.Rechargeablebatterieshavealowercapacityandshouldnotbeused.
The device switches off automatically after 15 minutes if no buttons are pressed. This prevents the battery from drain-
ing. This automatic shut-off function can be disabled.
Do not use the multimeter when the battery compartment is open or when the battery compartment cover is missing.
Do not take measurements in potentially explosive areas, damp rooms or adverse conditions. Adverse conditions
include:Moistureorhighhumidity,dustandammablegases,vapoursorsolvents,thunderstormsandstrongelec-
tromagneticelds.
Forsafetyreasons,onlyusetestleadsoraccessoriesthatmatchthemultimeter’sspecications.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC276 TRMS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC276 TRMS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info