536153

Voltcraft VC265 Manual

46
Zoom out
Zoom in
Previous page
1/118
Next page
46
h) Diode Test
ƽ
Make sure that all the circuit parts, switches and components and other objects of
measurement are disconnected from the voltage and discharged.
- Switch on the DMM and select measuring range
.
- Press “SELECT” (9) button to switch measurement functions. The diode
symbol appears in the display. Pressing this button again takes you to
the next measuring function.
- Plug the red measuring line into the Ω measuring jack (7) and the black
measuring line into the COM measuring jack (8) .
- Check the measuring lines for continuity by connecting both measuring
prods with one another. The value must be approximately 0 V.
- Now connect the two measuring probes with the object to be measured
(diode).
- The display shows the continuity voltage “UF” in volt (V). If “OL” appears, the diode is measured in
reverse direction (UR) or the diode is faulty (interruption). Perform a counter-pole measurement to
check.
- After measuring, remove the measuring lines from the measured object and turn the DMM off.
i) Continuity Check
ƽ
Make sure that all the circuit parts, switches and components and other objects of
measurement are disconnected from the voltage and discharged.
- Switch on the DMM and select measuring range
.
- Press “SELECT” (9) button twice to switch measurement functions. The
symbol for continuity check now appears in the display. Pressing this button
again takes you to the first measuring function etc.
- Plug the red measuring line into the Ω measuring jack (7) and the black
measuring line into the COM measuring jack (8) .
- A continuity value of less than 10 Ohm is identified as continuity; in this
case a beep sounds.
- If “OL” (overload) appears on the display, you have exceeded the measuring range or the measuring
circuit has been broken.
- After measuring, remove the measuring lines from the measured object and turn the DMM off.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC265 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC265 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info