504511

Voltcraft VC130 Manual

38
Zoom out
Zoom in
Previous page
1/90
Next page
38
i) Temperature measuring (only VC150)
ƽ
The enclosed temperature sensor is designed for a temperature range from –40 to +
230 °C, which is sufficient for most applications. To be able to use the full measuring
range of the device, you need an optional K-type sensor. Here you might need to use
the optional measuring adapter.
- Turn the DMM on and select measuring range “°C”
- Disconnect all measuring leads from the measuring instrument.
- Connect the enclosed temperature sensor with the DMM. The red plug must be inserted into the
socket “°C” (7), the black plug into the socket “COM” (5).
- Now expose the sensor tip to the temperatures.
- The display shows the temperature on the sensor. If “OL” appears, the measuring range was exceed-
ed or there is no sensor connected.
- After measuring, remove the adapter and turn the DMM off. Turn the rotary switch to the position
“OFF” or turn the device off via the “POWER” switch.
☞
If the two sockets “COM” (5) and “°C” (7) are short-circuited, the ambient temperature of
the measuring device is displayed.
The use of K-type sensors with miniature plugs requires the application of the optional mea-
suring adapter (see chapter “Optional measuring adapter”).
SELECT button (only VC170)
The SELECT button has several functions depending on the measuring range. For function switching,
for a relative measuring function and for manual selection of the measuring range.
Measuring function Function
Voltage measuring V AC/DC Manual measuring range selection
Pressing 1x switches to manual measuring range selection.
Each further press changes the measuring range.
To deactivate, keep this button depressed for approx. 2 seconds.
The display shows “AUTO”. Auto range is active again.
Resistance Relative measuring
Pressing 1x saves the displayed value and sets the display
to zero. The display indicates the difference between the saved
value and the actually measured value (ideal to exclude the line
resistance of the measuring leads). The delta icon appears on the
display ( ). The automatic measuring range selection is deacti-
vated now.
To deactivate, keep this button depressed for approx. 2 seconds.
The display shows “AUTO”.
Auto range is active again.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC130 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info