Manual Voltcraft VC-5080 (page 36 of 100) (English, German, Dutch, French)

738286

Zoom out

Zoom in

1/100

c) Resistance measurement

Make sure that the circuit components, circuits and components to be measured or any other

measuring objects are voltage-free and discharged.

Proceed as follows to measure resistance:

- Turn the rotary switch to the measuring range Ω. The small current values beneath

the measuring ranges indicate the measuring current.

- Connect the black test lead to the COM socket (6) and the red test lead to the VΩ

socket (7).

- Zero the multimeter using the adjustment screw (3).

- Make sure that the “Vrms/Vp-p” button (9) is not pressed.

- Connect both test leads and wait until the scale indicator has stabilized. The display

should show a value of approx. 0 ohm. Zero the meter to 0 ohm using the 0 ohm

adjustment knob (8) in case of deviation. Always zero the multimeter when chang-

ing measuring ranges. If a zero adjustment cannot be conducted, the micro (AAA)

batteries are in need of replacement.

- Read the measured value from the “Ω” scale. Multiply the displayed value by the measuring range to obtain the

correct reading (e.g. 100Ω (display) x10kΩ (measuring range) = 100 x 10,000 = 1MΩ (measured value).

- After measurement, turn the rotary switch to position “OFF” to turn off the multimeter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-5080 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC-5080 Manual

Product: