Manual Voltcraft VC-13A (page 4 of 12) (English, German, Dutch, French)

738292

Zoom out

Zoom in

1/12

• This device has left our factory premises in a safe and perfect condition.

• We kindly request the user to observe the safety instructions and warnings contained in the

enclosed operating instructions so this condition is maintained and to ensure safe operation.

• The unauthorised conversion and/or modication of the unit is not permitted for safety and

approval reasons (CE).

• Consult a professional if you are unsure how to operate the equipment or how to connect it

safely.

• Meters and their accessories are not toys and should be kept out of the reach of children!

• In commercial institutions, the accident prevention regulations of the Employer’s Liability

Insurance Association for Electrical Systems and Operating Facilities are to be observed.

• In schools, training centres, hobby and self-help workshops, use of the measuring device

must be supervised by trained personnel in a responsible manner.

• Before measuring voltages, always make sure that the measuring instrument is not set to a

measuring range for currents.

• The voltage between any socket of the measuring instrument and earth may not exceed 300

V (DC/AC) in Measurement Category III.

• Be especially cautious when dealing with voltages exceeding >33 V (AC) or >70 V (DC)! Even

at these voltages, there is a danger of fatal electric shock if you touch electric conductors.

• To eliminate the risks of electric shock, do not directly or indirectly touch the connections/

measuring points during measurements. During measuring, do not grip beyond the tactile grip

range markings on the test probes.

• Do not use the multimeter just before, during or just after an electrical storm (electrical shock!

/ high-power surges!). Make sure that your hands, shoes, clothing, the oor, the measuring

device and/or measuring lines, circuits and circuit components are always dry.

• Do not use the tester in rooms or under adverse ambient conditions in which ammable

gases, vapours or explosive dust may be or are present.

• Avoid operation near strong magnetic or electromagnetic elds, transmitter aerials or HF

generators. These can distort the measurement.

• For safety reasons, use only measuring cables or accessories which are adjusted to the

specications of the multimeter when measuring. Only use double, or strengthened, insulated

measuring accessories.

• If you have reason to assume that safe operation is no longer possible, disconnect the device

immediately and secure it against inadvertent operation. Safe operation can no longer be

assumed if:

- the device is visibly damaged,

- the device does not function any more and

- the device was stored under unfavourable conditions for a long period of time or

- it has been subjected to considerable stress during transportation.

• Do not switch the measuring instrument on immediately after it has been taken from a cold

to a warm environment. The condensation that forms might destroy your device. Allow the

device to reach room temperature before switching it on.

• Do not leave packaging material carelessly lying around, as it could become a dangerous

plaything for children.

• Also pay attention to the safety instructions in each chapter of these instructions.

DESIGNATION OF INDIVIDUAL PARTS

1 Analogue scale display

2 Calibration screw for scale pointer

3 0-Ohm calibration control for measuring resistance values

4 Rotary switch for setting the measuring functions and ranges

5 COM socket (reference measuring point, negative pole)

6 V/mA/Ω socket (positive pole)

7 Battery and safety compartment on the reverse side

PRODUCT DESCRIPTION

• The analogue multimeter (hereinafter referred to as multimeter) is equipped with a shock-attenuating

pointer instrument.

• The multimeter can be used in any operating position.

• The mA-current range is protected against overload with a micro fuse.

• The individual measuring functions and ranges are selected with a rotary switch.

• The multimeter can be used for up to CAT III max. 300 V for hobby or professional applications.

• On delivery, the measuring leads may be covered by protective sleeves. Before use, pull the sleeves off

the safety plugs.

• After use, put them back for transport protection.

• The scale pointer can be calibrated with the calibration screw. Perform this before each measurement to

prevent inaccurate measurements.

OPERATING INSTRUCTIONS

VC-13A ANALOG MULTIMETER

ITEM NO. 1386327

INTENDED USE

• M

easuring and displaying electrical values in the range of measurement category CAT III up to max. 300 V

against earth potential, pursuant to EN 61010-1

• Alternating and direct voltage measurements up to max. 300 V

• Measurement of direct current up to 250 mA

• Attenuation measurements from -20 dBm to +22 dBm

• Measurement of resistance up to 2 MOhm

• Battery test for 1.5 V and 9 V batteries

The multimeter may be operated only with a Mignon battery (AA, UM3, LR6 or equivalent).

The measuring instrument must not be used when it is open, i.e. with an open battery compartment or

when the battery compartment cover is missing. Do not make measurements in potentially explosive areas

(Ex) or damp rooms or under unfavourable ambient conditions. Adverse ambient conditions include: Damp

or high humidity, dust and ammable gases, fumes or solvents, and thunderstorms or thunderstorm condi-

tions like strong electrostatic elds, etc.

For safety reasons, when measuring only use measuring cables or accessories that are suitable for the

specications of the multimeter.

Measurements in circuits >33 V/AC and >70 V/DC may be carried out only by specialists and trained

persons who are familiar with the pertinent regulations and the resulting dangers.

Any use other than that described above can lead to damage to the product and may involve additional

risks such as short circuits, re, electric shock etc. No part of the product may be modied or converted!

The safety instructions are to be observed without fail!

PACKAGE CONTENTS

• Multimeter

• Test leads

• Battery (Type AA)

• Operating instructions

Up-to-date Operating instructions:

1. Open www.conrad.com/downloads in a browser or scan the displayed QR

code.

2. Select document type and language and enter the item number into the

search eld. After submitting the query you can download displayed records.

DESCRIPTION OF SYMBOLS

An exclamation mark in a triangle indicates important information

contained in these operating instructions that must be observed by all means.

The lightning symbol in a triangle warns of electric shock danger or the impairment of the

electrical safety of the appliance.

The “arrow” symbol is used where special tips and notes on operation are provided.

This product has been CE tested and complies with the required European guidelines.

Class 2 insulation (double or reinforced insulation).

CAT III Measurement Category III for measuring circuits of installations in buildings (e.g. electric

sockets or sub-distributions). This category also includes all lower categories (e.g. CAT II for

measuring on electrical devices and CAT I for measuring signal and control voltages). The

measuring operation in CAT III is permitted only with probe tips with a maximum free contact

length of 4 mm or with cover caps over the probe tips.

Earth potential

SAFETY INSTRUCTIONS

Please read all the instructions before using this device, they include important informa-

tion on its correct operation.

Damages caused by failure to follow these operating instructions will void the warranty/

guarantee! We do not assume any liability for any resulting damage!

We do not assume any liability for personal injuries and material damages caused by the

improper use or non-compliance with the safety instructions! In such cases, the warranty

will be null and void.

VERSION 01/16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-13A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC-13A Manual

Product: