633394
34
Zoom out
Zoom in
Previous page
1/74
Next page
34
Do not use cleaning agents which contain carbon, petrol, alcohol or similar substances for cleaning
purposes. These could corrode the surface of the measuring instrument. Furthermore, the fumes are
hazardous to your health and explosive. Moreover, you should not use sharp-edged tools, screw-
drivers or metal brushes or similar for cleaning.
For cleaning the device or the display and the measuring lines, use a clean, fuzz-free, antistatic slight-
ly damp cloth. Leave the device to dry completely prior to using it for the next measuring operation.
Inserting/changing the batteries
The multimeter requires two AAA batteries for operation. You need to insert new, charged batteries pri-
or to initial operation or when the battery change symbol appears on the display.
The line allocator requires a 9V compound battery just like the “remote” unit. You need to insert a new
battery once the display shows “LO BAT”.
To insert/replace the batteries in the DMM, proceed as follows:
- Disconnect the measuring device from all measuring circuits
and turn it off.
- Remove the protective rubber frame (12) from the device.
- Undo the screws on the battery compartment cover (11) and
remove the cover.
- Place new batteries into the battery compartment observing
the correct polarity.
- Now close the housing carefully again.
To insert/replace the batteries in the remote unit, proceed as
follows:
- Disconnect all measuring cables from the device and switch
it off.
- Undo the screw of the battery compartment cover (15) and
remove the cover.
- Place a new battery into the battery compartment, observing
the correct polarity.
- Now close the housing carefully again.
Never operate the measurement device when it is open.
!RISK OF FATAL INJURY!
Do not leave flat batteries in the device. Even batteries protected against leaking
can corrode and thus release chemicals which may be detrimental to your health or
destroy the battery compartment.
Do not leave batteries lying around carelessly. They might be swallowed by chil-
dren or pets. If swallowed, contact a physician immediately!
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft LZG-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft LZG-1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info