743027

Vlectro VL-AT Manual

6
Zoom out
Zoom in
Previous page
1/77
Next page
Vlectro VL-AT
Blow continuously through the mouthpiece for about 5 seconds, a long beep tone sounds
continuously while blowing. Only stop blowing until the beep tone stops together with
dynamic progress bar full displayed. Two short “di-di” sounds will be heard when the
sample is being taken successfully, test result will be displayed accordingly.
Ready-blow interface
Dynamic progress bar display on LCD while blowing, as following pictures
Dynamic progress bar
Device will power off automatically, when user fails to start the blowing test within 25s.
Test reading interface
◆ Under test reading interface, can press key to re-test, or device will power off
automatically if there’s no any operation within 60 seconds.
◆ Under test reading interface, keep press key to switch units between mg/L,‰,%,
next test reading will show with this re-setted unit
4.4 Test result show
If the test result exceeds the alert level, the alarm indicator light turns on red and flashes
10 times together with “di-di” sound prompt.
While test result lower than alarm level, the alert indicator light turns on green.
The reading range is 0.00‰BAC -2.00‰BAC.
“2.00‰BAC”will be shown if the reading is higher than 2.00‰BAC.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vlectro VL-AT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vlectro VL-AT in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info