Manual Vlectro VL-AT (page 5 of 77) (English, German, Dutch, French, Italian, Polish, Spanish)

743027

Zoom out

Zoom in

1/77

Vlectro VL-AT

4.2 Wait for preheating

After warm-up, will enter into heating mode to active the warming of sensor, countdown

19s (19-00), to make sensor work better and more sensitive.

Countdown interface

➢ Tips: Alarm level setting

Under self-checking and preheating state, double press button to enter alarm level

setting mode. Short press the button again to select alarm level as b2,b3,b5,b8, after

setted, waiting for 2 seconds, device will enter into test mode automatically.

b2: Means alarm level as 0.20‰BAC(=0.020%BAC or 0.100mg/L)

b3: Means alarm level as 0.30‰BAC(=0.030%BAC or 0.150mg/L)

b5: Means alarm level as 0.50‰BAC(=0.050%BAC or 0.250mg/L)

b8: Means alarm level as 0.80‰BAC(=0.080%BAC or 0.400mg/L)

4.3 Blow test

After 19s of heating, when the “blow” flashes, the instrument can be breath tested by the

mouthpiece. Press the ON/OFF button one time when starting the breath test, the

instrument is officially sampled. “bLo” flashes for about 25 seconds ,Please carry out the

measurement within this period.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vlectro VL-AT in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vlectro VL-AT Manual

Product: