520742
12
Zoom out
Zoom in
Previous page
1/84
Next page
- 11 -
www.vivotek.com
9 Opto-isolated sensor input 1(+) Max. 50mA, 12V DC
10 Opto-isolated sensor input 1(-) Ground
11 Opto-isolated sensor input 2(+) Max. 50mA, 12V DC
12 Opto-isolated sensor input 2(-) Ground
13 RS485 A D+, non-inverting
14 External power input Min. 1.5A, 12~15V AC or DC
15 External power input Min. 1.5A, 12~15V AC or DC
16 Relay output 3 – Normal Open Max. 1A, 24V DC or 0.5A, 125V AC
17 Relay output 3 – Common Short with NC at initial state
18 Relay output 3 – Normal Close Max. 1A, 24V DC or 0.5A, 125V AC
19 Relay output 4 – Normal Open Max. 1A, 24V DC or 0.5A, 125V AC
20 Relay output 4 – Common Short with NC at initial state
21 Relay output 4 – Normal Close Max. 1A, 24V DC or 0.5A, 125V AC
22 Opto-isolated sensor input 3(+) Max. 50mA, 12V DC
23 Opto-isolated sensor input 3(-) Ground
24 Opto-isolated sensor input 4(+) Max. 50mA, 12V DC
25 Opto-isolated sensor input 4(-) Ground
26 RS485 B D-, inverting
Power source
Pair of pin 14, 15 of AC or DC input is a replacement with the power adapter in case the
range cannot meet the requirement. The voltage of the power source can be AC or DC
and should fall in the range between 12V and 15V. Polarity does not matter. The DC
output through Pin 1, 2 is fed from power adapter of Video Server or pin 14 and pin 15
if an external power source is attached. The current of external devices is limited to less
than 500mA.
The power adapter of Video Server and the external power supply are prohibited to
exist together. Only one source can feed power to Video Server. Improper usage will
result in serious damage.
RS485 interface
The PTZ control commands can be directed through pin 13 and pin 26 to control the PTZ
cameras. If the distance from the controlled device is too far to allow accurate function,
an external power source may be used to amplify the RS485 signal.
Digital I/O control
Video Server provides four pairs of digital inputs and four sets of relay switches. Pin 9 to
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek VS2403 Video Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek VS2403 Video Server in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek VS2403 Video Server

Vivotek VS2403 Video Server Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info