520742
10
Zoom out
Zoom in
Previous page
1/84
Next page
- 9 -
www.vivotek.com
Item LED status Description
LED1 and LED2 blink alternately by 150ms During the test
LED1 blinks one time and LED2 blinks 3 times TM1302 test fail
Power-On-Self-Test
LED1 blinks one time and LED2 blinks 4 times RTL8100BL test
fail
LED1 off, LED2 off Network fail Network
LED1 blink every 0.5 second, LED2 off Network normal,
Heartbeat
Camera control LED2 blink every 1 second Get the control
message
BNC video inputs
Video Server allows up to four cameras attached at the same time. To ensure video
modulation type being detected correctly, cameras should be attached sequentially from
“VIDEO1” to “VIDEO4” and powered on before Video Server is powered on.
DIP switches “1” to “4”
There are four DIP switches numbered from “1” to “4” in the front panel regarding of
each video input. They are used to enable the 75-ohm resistance of video impedance.
They should be kept ON if the video input is terminated in the Video Server or left in high
impedance for looping.
Auxiliary button “RESET”
There is a button located at the left of “VIDEO4” in the front panel. Refer to the Appendix
Troubleshooting
for the detailed usage of system recovery.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek VS2403 Video Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek VS2403 Video Server in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek VS2403 Video Server

Vivotek VS2403 Video Server Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info