520744
16
Zoom out
Zoom in
Previous page
1/86
Next page
- 14 -
Modem Environment
Hardware installation
Though Video Server is designed to serve real-time images in Ethernet, it also supports
the dial-up network. To use a dial-up network, the Ethernet socket should be left
disconnected since Ethernet is the first priority among available interfaces. After
powering up, Video Server will detect if any external modem is connected to the modem
port . As soon as a modem is detected, the heartbeat LED will flash periodically. If no
modem responds, Video Server will assume the included null modem cable is connected
to perform system configuration. Then both LED’s under the power LED will turn on until
the dial-up connection over null modem is established.
Installations of both null modem and modem are introduced as follows. The null modem
mode can be used for point-to-point connection in local environment; the modem mode
also applies to TA in ISDN network. Though the baud rate can be setup to 115200 bit per
second, the actual data rate depends on the network connection.
In the following content, dial-in connection denotes a passive Video Server waiting for a
phone call to establish a point-to-point connection. Dial-out connection denotes an
active Video Server to dial out to the other end of a dial-up server or any Internet service
provider, abbreviated as ISP, to request a point-to-point connection.
Cable connection
Null modem mode
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek VS2101 Video Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek VS2101 Video Server in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek VS2101 Video Server

Vivotek VS2101 Video Server Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info