520744
15
Zoom out
Zoom in
Previous page
1/86
Next page
- 13 -
Initial Access to the Video Server
The Video Server can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the network
settings on the configuration page. For complete protection from illegal usage, the Video
Server provides two privileges and always needs user name and password before access.
The standard level is the USER mode that consists of twenty user profiles. Each user is
able to access the Video Server except for system configuration. Twenty users’ profiles
are also maintained by the administrator. The highest level is ROOT mode that only
opens to Administrator for initial setup, system configuration, user administration and
software upgrade. The user name of the Administrator is internally assigned to “root”.
When connecting to the Video Server, users will be requested for user name and
password by an authentication message window. A root password, identical to the Video
Server's serial number, is needed for the initial access to a newly installed Video Server.
The administrator must change the root password immediately after the initial
installation to ensure security. The new root password should be well memorized since
there is no way to retrieve or recover it. After changing the password, the browser will
display an authentication window again to ask for the new password.
The other important part is network settings. The software configuration above makes
the Video Server easily accessed through local networks. However Administrator should
review the network settings on the configuration page according to the existing service.
The safe and easy way is to compare the network settings with another PC or
workstation in the same network.
By default the Video Server will acquiring IP address automatically every time it reboots.
If the network settings are sure to work all the time, disable the “Reset network at
next boot” option if this IP address is already reserved for this the Video Server.
Clearing this option will fix IP address of the video server every time it boots up. If the
option stays checked, the Video Server will pick up any available IP address
automatically every time the system boots up.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek VS2101 Video Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek VS2101 Video Server in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek VS2101 Video Server

Vivotek VS2101 Video Server Quick start guide - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info