653443

Vitamix T G 2 - Blending Station Manual

12
Zoom out
Zoom in
Previous page
1/23
Next page
How to operate your T&G 2 Blending Station
®
using the
six Programmed Buttons.
The following is the basic factory settings of the six PROGRAMMED buttons:
• Press Button One for program - SMOOTHIE -
Blends drinks with just juice and ice.
• Press Button Two for program - SMOOTH 2 - Blends regular smoothies for an extended
cycle.
• Press Button Three for program - COFFEE - Blends light coffee drinks.
• Press Button Four for program - SHAKES -This cycle is good for ice cream and
milkshakes.
• Press Button Five for program - COCKTAIL - Blend margaritas, daiquiris.
• Press Button Six for program - OTHER - Specialty drinks, using frozen fruit and other hard
ingredients for a thick but consistent drink.
1. Place liquids and soft foods in the machine’s container first, solid items and ice last. Prepare food
by cutting or breaking into 1-3 inch (3-8 cm) pieces. Frozen fruit, especially, should be as small as
practical. Thawed or partially thawed fruit is recommended. We recommend Programmed Button
Five or Six for heavy-duty blending.
2. Set the container on the motor base by aligning it over the centering pad anchored to the base.
(
Motor must be completely stopped before positioning container). Containers are not to be
used for hard, dry materials. Avoid running the machine with an empty container.
3. Always use a lid when blending. If blending hot ingredients, the lid must be securely in place.
4. Select desired programmed setting by pressing any of the Pre-Set Buttons One through Six. The
machine will begin immediately to cycle through the selected program, and turn off when the
program is complete. Each button has a different pre-selected combination of speed and length
for blending.
NOTE: If you detect a change in the sound of the machine or if a hard or foreign object comes into
contact with the blades, do not serve the drink. Inspect your blade assembly for loose, knicked or
missing parts. If parts are loose, missing or knicked replace with a new blade assembly. (See page 20).
5. Once one of the six PROGRAMMED Buttons is pushed the machine will start and stop automatically.
By pressing another PROGRAMMED Button, the machine will stop the blending cycle.
6. During any of the blending cycles, by pressing the PULSE H button the speed of the blending can
increase up to 100% of the motor speed. By pressing the PULSE L button during a blending cycle the
speed of the motor will be increased/decreased to 50%. Once released the motor speed will revert
back to the blending cycle of the PRE-SET
PROGRAM.
12
nstructions
I
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix T G 2 - Blending Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix T G 2 - Blending Station in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info