653443
10
Zoom out
Zoom in
Previous page
1/23
Next page
Gasket Installation Instructions:
1. Follow the instructions on page 8 on preparing the counter area for the installation of
your In-Counter T&G 2 Blending Station.
®
Also, use the Template Sheet (provided in your
machine’s original package) to assist you in the placement and ventilation of
your machine.
2. Lay the blender on its back with the motor pointing toward you. Allow 1-2 in. (2.54 -5.08 cm)
of the motor base to hang over the edge of the counter top to facilitate easy fitting of the
gasket.
3. Slide the power cord through the gasket, with the groove of the gasket pointing toward the
machine base.
4. Starting at one corner of the motor base, press the gasket onto the motorbase, so that the
groove in the gasket seats itself onto the stepped bottom edge of the motor base.
5. Working around the bottom edge of the motor base, press the gasket onto the motor base
until the entire perimeter of the gasket is firmly attached to the motor base.
6. Carefully place the blender into the hole in the counter.
7. Be sure that the gasket is properly seated on the motor base and against the counter top.
8. Do not secure the machine to the counter with bonding materials.
This gasket was designed to protect your machine from water damage and to
reduce noise. Failure to properly install this gasket could result in moisture
damage.
n-Counter Gasket
Front
Back
10
I
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitamix T G 2 - Blending Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitamix T G 2 - Blending Station in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info