704361
32
Zoom out
Zoom in
Previous page
1/72
Next page
EN 32
1. Hold the support bar (8) to the spacer piece (9) and place two screws (15) with two
curved washers (12) in the upper two drilled holes.
2. Place the support bar (8) with the spacer piece (9) on the foot with the 3 holes (2)
and place two curved washers (12) and two self-locking nuts (14) on the rear side
of the screws. Make sure that the thread for adjusting the height faces outwards.
CAUTION: Do not yet fully tighten the screws!
3. First, attach the cross struts (10) to the two adjacent feet of the support bar (8). To do
this, use one of the short screws (26), the self-locking nuts (14) and two at washers
(13) on the front and two curved washers (12) on the back. Make sure that the curved
washers (12) are tted on the back and that the at washers (13) are tted on the
front. CAUTION: Do not yet fully tighten the screws!
4. Then, attach the cross struts (10) to the bottom hole of the support bar (8) with a
long screw (15), a self-locking nut (14) and one at washer (13) on the front and one
curved washer (12) on the back. Make sure that the curved washer (12) is tted on
the back and that the at washer (13) is tted on the front.
5. Now fully tighten all screws! It is essential that you use the tool supplied to tighten
the screws (as described in section “ Assembling the Frame“, point 4). Self-locking
nuts cannot be tightened by hand.
Step 5: Mounting the Handle Bar
1. Undo the thread of the plastic sleeve (7).
2. Push the thread onto the handle pole (5) and insert the handle pole into the plastic
sleeve (7) on the support bar (8).
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitalmaxx SP15003 - Z09992 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitalmaxx SP15003 - Z09992 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info