704362
15
Zoom out
Zoom in
Previous page
1/40
Next page
15 EN
Before Assembly
Lay out all parts carefully on a at oor. To be on the safe side, place a protective lm
or blanket underneath the parts to prevent any damage to delicate surfaces.
Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
Assembly
Follow these assembly instructions step by step to prevent any errors during set-up and
subsequent use:
1. Screw the feet (1, 7) onto the bottom of the main unit (5). To do this, use the wash-
ers (2), spring washers (3) and screws (4) as well as the hexagon key (8) supplied.
(Picture D)
2. Turn the pedals (6, 10) tight on the pedal mounts using the spanner (9) which is sup-
plied. Make sure that the markings L (left) and R (right) on the pedals and mounts
match. (Picture E)
The right pedal (right-hand thread) is tightened in the clockwise direction.
The left pedal (left-hand thread) is tightened in the anticlockwise direction.
Adjusting the Pedal Straps
The size of the strap on the pedal can be changed. To do this, loosen the screws on the
straps, adjust them to the size you want and then turn them hand-tight again. (Picture F)
Inserting / Changing the Battery in the Training Computer
1. Pull the training computer (13) out of the main unit (5).
2. Insert a 1.5 V battery, AAA type into the battery compartment on the back of the train-
ing computer. Pay attention to the correct polarity (+ / –). (Picture G)
Before inserting the battery, check whether the contacts in the device and on the
battery are clean, and clean them if necessary.
3. Carefully insert the training computer into the main unit.
If the training computer stops working, the battery needs to be replaced.
Always take the battery out when it is dead or if you will not be using the device for a
prolonged period. This will prevent any damage caused by leaks.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitalmaxx SC-W002E - Z05032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitalmaxx SC-W002E - Z05032 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info