Manual Visonic Powermaster-360 (page 14 of 96) (English)

769323

Zoom out

Zoom in

1/96

14 D-307500 PowerMaster 360 Installer's Guide

Deleting a Z-Wave device

To delete an enrolled device, press and hold the (-) button for 2 seconds, see Figure 3.1 (J). The red LED blinks

quickly, see Figure 3.1 (N) enroll LED. A success beep is emitted and the LED turns off.

Notes:

 To cancel the deletion, press and hold the (+) or (-) buttons for 2 seconds. The LED stops blinking.

 If the deletion is not successful, the red LED lights for 3 seconds and a failure beep is emitted.

 Long press on the (-) button, returns the panel to normal operation.

3.8 Panel reset

To reset the panel, use a blunt instrument to press the Reset button, see Figure 3.1 (K). The orange LED lights

constantly until panel initialization is completed, see Figure 3.1(N). When the PowerLink is reset, the orange LED (N)

turns off.

3.9 Factory default restore

To restore system parameters to the factory default parameters, complete the following steps:

Note: The panel must be disarmed before performing the reset.

1. Press the Back to Factory button for 30 seconds; see Figure 3.1 (L).

Note: During restore process, the red LED blinks; see Figure 3.1 (N).

2. The green LED blinks 3 times and a success beep is emitted. The panel immediately initiates a software reset.

Note: If the default restore is not successful, the red LED light remains on for 3 seconds and a failure beep is

emitted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Visonic Powermaster-360 Manual

Product: