580332
60
Zoom out
Zoom in
Previous page
1/74
Next page
APPENDICES
D-304829 PowerMaster-10/30 G2 User's Guide 59
APPENDIX A. FUNCTIONS OF CONTROLLING DEVICES
A1. KP-160 PG2
Arming and Disarming the System
Step
Operation
User Actions
Keyboard & Panel
Response
Optional
1
Select a PARTITION
(if Partition is enabled)
Any combination of
The selected key blinks.
2
Arm AWAY
+ [ ]
The selected key and the
"Present Prox Tag" icon
( ) begin to blink and
prompt you to present
your Tag.
The keyprox's LED blinks
red once to indicate
transmission of the
arming command to the
control panel.
The LED and the buzzer
then indicate the control
panel's response see
KP-160 PG2 User's Guide,
“System Status and
Indications section 3.3.
Arm HOME
+ [ ]
Disarm (OFF)
+ [ ]
Optional
3
Quick arm AWAY
(If Quick Arm is enabled)
( 2 sec.)
Quick arm HOME
(If Quick Arm is enabled)
( 2 sec.)
Optional
4
INSTANT (After arming HOME/
AWAY)
LATCHKEY
(After arming AWAY)
Initiating Alarms
Alarms
Actions
Response
Notes
Emergency alarm
( 2 sec.)
See section
3.3. in KP-160
PG2 User's
Guide
When pressing the Fire or Emergency icons, the
KP-160 PG2 starts beeping. After pressing the
button for approx. 2 seconds, the KP-160 PG2
sends the command.
Fire alarm
( 2 sec.)
Panic alarm
( 2 sec.)
When pressing the Fire and Emergency icons
together, the KP-160 PG2 starts beeping. After
pressing the button for approx. 2 seconds, the
KP-160 PG2 sends the Panic command.
Zone Status
Alarms
Response
Notes
For NOT READY ( ) /
BYPASSED ( )
Upon each press of the key, the next zone number
appears on the zone # display, .
Zone Status when working with Partitions
Alarms
Response
Notes
For NOT READY ( ) /
BYPASSED ( )
/ /
Upon each press of the key, the next zone number
assigned to the pressed Partition number appears on the
zone # display, .
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info