580332

Visonic PowerMaster-10-30 G2 Version 18 Manual

58
Zoom out
Zoom in
Previous page
1/74
Next page
MAINTENANCE
D-304829 PowerMaster-10/30 G2 User's Guide 57
10. Maintenance
Replacing the Backup Battery
There is generally no need to replace the battery since the battery is rechargeable. If a CPU LOW BATTERY
trouble message is received when the control panel is connected to AC power and this trouble state continues
for more than a few hours, the battery may need to be replaced. An original Visonic battery must be used of
which there are a number of types. For assistance in battery replacement, contact Technical Support.
Replacing Wireless Devices Batteries
The wireless devices supplied with your system are powered by batteries that last several years, in normal
use.
However, if and when a battery becomes weak, the device itself sends a “low battery” message to the control
panel, and a low battery trouble message is displayed together with the zone information (see Chapter 5 -
Correcting Trouble Situations).
The respective manuals of these sensors or devices should be consulted for proper battery replacement
guidelines to be performed by the installer.
Accessing 24-Hour Zones
To access a sensor defined as a 24-hour zone without causing an alarm:
• Click - the display will read: USER SETTINGS.
• Click - the display will read: ENTER CODE ___.
Key your secret 4-digit <User Code> - the buzzer will play the “happy Tune” (- - - ––––).
You have 4 minutes during which the 24-hour sensor can be opened and accessed. When the 4 minutes are up,
the system will automatically revert to the normal mode.
Cleaning the Control Panel
The control panel may occasionally get stained if touched with greasy fingers, and may accumulate dust after a
long period of use. Clean it only with a soft cloth or sponge moistened lightly with a mixture of water and mild
detergent, and then wipe it dry.
The use of abrasives of any kind is strictly forbidden. Also never use solvents such as alcohol, kerosene,
acetone or thinner. These will certainly ruin the external finish and damage the transparency of the top window.
Event Log
All events are memorized in an event log that contains up to 100 entries. You can access this log, review the
events one by one and draw functional conclusions.
Note: Up to 250 events (PowerMaster-10 G2) / 1000 events (PowerMaster-30 G2) are stored in the event log that can
be reviewed via the Remote Programmer PC software application or by the remote PowerManage server.
If the event log fills up completely, the oldest event is deleted upon registration of each new event.
The date and time of occurrence are memorized for each event. When reading the event log, events are shown
in chronological order - from the newest to the oldest. The event description is shown first, then the date and
time. The two displays are shown alternately several times, until you click
to move on to an older event,
or until the “no action” 4-minute timeout restores the system to the normal operating mode.
Access to the event log is provided by clicking the button and then keying your master user code.
To read the event log, proceed as follows:
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info