Manual Visonic PowerMaster-10-30 G2 Version 18 (page 50 of 74) (English)

580332

Zoom out

Zoom in

1/74

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS

D-304829 PowerMaster-10/30 G2 User's Guide 49

7. Event Reporting and Control by Telephone and SMS

Event notifications by Telephone

The PowerMaster can be programmed for selective notification of event messages to private telephone

subscribers – See Chapter – 6, B.12 Programming Private Phone, Email, MMS and SMS Reporting. Messages

are divided by type into the following groups:

Group Events Reported

1 Fire, Burglary, Panic, Tamper

2* Arming AWAY, Arming HOME, Disarming

3 No-activity, Emergency, Latchkey, Gas, Flood, Temperature

4* Low-battery AC failure

* PowerMaster-30 G2 only

Note: For UL installations, SMS is a supplementary feature.

PowerMaster-10 G2 control panels

In case of alarm the following voice signal will be sent to private telephones upon event reporting:

* FIRE: ON - ON - ON - pause....

(- - - - - -

......).

** BURGLAR: ON continuously ( ...)

*** EMERGENCY: 2-tone siren; like an ambulance.

To stop the alarm notification – press the "2" key on your telephone keyboard. The alarm sound will stop

immediately.

The called party must acknowledge the message (as explained later on). However, if there is no response the

message will be repeated as many times as possible within a 45-second time limit. When the 45 seconds are

up, the PowerMaster will disengage the line and call the next private telephone number on its list.

The called party must acknowledge the message by pressing the "2" key on the telephone keypad. As a result,

the PowerMaster may continue to notify the next programmed telephone number, or if so programmed, consider

the event as reported - see Chapter – 6, B.11.

PowerMaster-30 G2 control panels

When the called party answers a call initiated by the PowerMaster, he will hear a verbal message composed of the

“house identity” and the type of event that occurred. For example, once smoke is detected in the Smith residence,

the message will be:

[The Smith Residence - Fire Alarm].

If a person under surveillance in the Watkins residence has been inactive, the message will be:

[The Watkins Residence - No Activity].

The called party must acknowledge the message (as explained later on), but if he does not respond, the

message will be transmitted repeatedly as many times as possible within a 45-second time limit. When the 45

seconds are up, the PowerMaster will disengage the line and call the next private telephone number on its list.

The called party can acknowledge the message by pressing a key on the telephone keypad, as follows.

Command Key

Acknowledge only: The PowerMaster disengages the line and considers the event duly reported.

Acknowledge and listen-in: The protected site is “bugged” for sound for 50 seconds. The called party

may prolong the listening session by pressing [3] again before the PowerMaster disengages the line, or

by pressing [1] to speak.

Acknowledge and speak out: The called party may speak for 50 seconds to whoever is in the

protected site. The called party may prolong the “speak out” session by pressing [1] again before the

PowerMaster disengages the line, or by pressing [3] to listen.

Acknowledge and 2-way conversation: You and the called party can speak and listen without any

necessity to switch the system from "listen-in" to "speak-out"

and

vice

versa for 50 sec. (extendable).

Acknowledge and request a status report: The PowerMaster will issue a verbal report of system

status. For example:

[Disarm - ready to arm] or

[Disarm - back door open] or

[Disarm - alarm in memory].

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Visonic PowerMaster-10-30 G2 Version 18 Manual

Product: