580332

Visonic PowerMaster-10-30 G2 Version 18 Manual

36
Zoom out
Zoom in
Previous page
1/74
Next page
MENUS AND FUNCTIONS
D-304829 PowerMaster-10/30 G2 User's Guide 35
B.12 Programming Private Phone, Email, MMS and SMS Reporting
The PowerMaster system can be programmed to send various event notification messages such as alarm,
arming or trouble events, to 4 private telephone subscribers by audible signal and, if a GSM option is installed,
also to 4 SMS telephone numbers. In addition, for users who are connected to the PowerManage server, event
notification messages can be sent to 4 private emails as well as to 4 private MMS and SMS telephone numbers
via the server. These reports can be programmed either instead of or in addition to the reports transmitted to
the monitoring company. Further details about the event notification by telephone and by SMS are provided in
Chapter 7. Event Reporting and Control by Telephone and SMS.
You can also determine the number of times the private telephone number is dialed and whether a single
acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be
required before the current event is considered reported.
Here you can program:
♦ The specific events you wish the system to report.
♦ The 1
st
, 2
nd
, 3
rd
, and 4
th
private telephone, MMS, SMS numbers and emails for reporting alarm and other
event messages to private subscribers.
♦ The number of redial attempts, two-way voice communication
∗
, and whether to use a single acknowledge
signal or an acknowledge signal from each telephone before the current event is considered reported.
Notes: The notification of events to other 3rd party applications (SMS/IP/personal phones) is a supplementary
feature that has not been investigated by UL and is not used in UL listed installations.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
VOICE REPORT
A. To Program Events to be Reported to private telephone
1.
PRIVATE REPORT
Enter the [USER SETTINGS] menu and select the [
PRIVATE REPORT
]
option and press .
1
2.
VOICE REPORT
The display will read [
VOICE REPORT
]. To enter this option press
.
3.
REPORTED EVENTS
When the display reads [REPORTED EVENTS] press .
2
disable report
The display shows the currently selected option.
4.
or
Click the or button until the display reads the event group
you wish to be reported via private phones, for example, [alarms].
3
alarms
5.
When you are satisfied with the setting, press to confirm.
alarms
A "Happy Tune"
☺
sounds. The display confirms the set events to be
reported, and returns to step 3.
5, 15
☺
Return to step 3
∗
Refers to PowerMaster-30 G2 with voice option only
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info