580332

Visonic PowerMaster-10-30 G2 Version 18 Manual

35
Zoom out
Zoom in
Previous page
1/74
Next page
MENUS AND FUNCTIONS
34 D-304829 PowerMaster-10/30 G2 User's Guide
B.10 Enabling / Disabling Auto-Arming
The PowerMaster system can be programmed to automatically arm itself on a daily basis at a predetermined
time. This feature is useful especially in commercial applications, such as in stores, to ensure that the system is
always armed and without having to assign security codes to employees.
♦ Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –
see section B.11.
♦ Auto-arming can arm a "NOT READY" system only if forced arming is enabled by the installer while
programming your system.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
1.
AUTO-ARM ENABLE
Enter the [USER SETTINGS] menu, select the [AUTO-ARM ENABLE] option
and press .
1
enable autoarm
The display shows the currently selected setting.
2
2.
or
Click the or button until the display reads the desired
setting, for example, [disable autoarm] and press to confirm.
disable autoarm
3.
☺
Return to step 1
A "Happy Tune"
☺
sounds. The display confirms the saved setting, and
then returns to the User Settings menu, step 1.
3
B.11 Setting the Auto-Arming Time
♦ Here you can program the exact time of the Auto-Arming.
Note:
This feature is not to be not to be enabled in UL Listed product.
1.
AUTO-ARM TIME
Enter the [USER SETTINGS] menu, select the [AUTO-ARM TIME] option
and press .
1
2.
arm time 12:00P
The display shows the current setting of the Auto-Arm Time. At the blinking
cursor position, enter the correct time, for example, “8:30A”, using the
numerical keypad.
4
3.
When you are satisfied with the setting, press to confirm.
TIME 08:30A
A "Happy Tune"
☺
sounds. The display confirms the saved time, then
returns to the User Settings menu, step 1.
5, 6
☺
Return to step 1
Additional Information (section B.10 - section B.11)
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
The display shows the current setting (indicated by a
symbol), for example, [
enable autoarm
]. You can
now select either to enable or disable auto-arming using the or button.
3
The
symbol now appears next to the newly selected option.
4
The display shows the current setting of the Auto-Arm Time, for example, "
12:00 PM
", with the cursor
blinking on the first hour digit "1". For detailed explanation of how to set the time - refer to SectionB.8 B.
5
The saved auto arm time is displayed without the cursor, for example, "
08:30 A
".
6
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info