744772
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
G
THE ROBOT IS EQUIPPED WITH THREE DIFFERENT MOVEMENT PATTERNS:
Automatic 1. In this mode, the robot will clean the area automatically
and adjust its cleaning behavior based on specific
situations.
Spiral cleaning mode 2. In this mode, robot takes the starting point as the center,
then turns outward in a spiral action, suitable for an open
area.
Zig-zag mode 3. The robot will automatically go into Zig-Zag cleaning when it
detects an open area or an environment with less
obstacles.
3.4 Scheduling
Schedule the robot to start cleaning automatically at a certain time every day.
NOTE: The robot can only be set when it’s in standby or charging on docking station. If the robot is in sleep mode,
long press “POWER” button on main body or ON/OFF on remote controller to wake it up. If the robot is in cleaning
mode, pause it before scheduling.
SCHEDULING ON THE ROBOT DISPLAY
1. Time Clock Setting
Press “PLAN” button shortly to enter time setting mode. The LED panel will show the current time. The left
two numbers on LED panel will flash, press “MAX” or “HOME” to increase or decrease hours.
Press “POWER” button to enter the minute-setting, the right two numbers on LED panel will flash, press
“MAX” or “HOME” to increase or decrease minutes.
Press “POWER” button to confirm and save the setting.
Press “PLAN” button to quit the time setting mode.
2. Setting scheduling time (keep the robot in standby or charging on station)
Press “PLAN” button long to enter scheduling setting, the left two numbers on LED panel will flash, press
“MAX” or “HOME” to increase or decrease hours.
TIP FOR ADAPTING THE CLEANING PATTERN
Press "mode" button on the remote control to select the cleaning pattern.
The chosen mode will be displayed on the LED display of the robot:
Mode no. 1111 shows on robot led display: intensive spiral cleaning mode;
Mode no. 2222 shows on robot led display: automatic cleaning mode;
Mode no. 3333 shows on robot led display: fast spiral cleaning mode;
Mode no. 4444 shows on robot led display: zig-zag cleaning mode.
!
12


Need help? Post your question in this forum.

Forumrules
1

Forum

vileda-vr-302

Reset search

  • vileda vr302 robot vacumn stopping after a minute showing error code 77 Submitted on 27-3-2023 at 15:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vileda VR-302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vileda VR-302 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info