Manual Viking MT 6112ZL (page 14 of 290) (English, Portuguese, Spanish)

667337

14

Zoom out

Zoom in

Previous page

1/290

Next page

0478 192 9807 C - EN

12

– the tyres (inflation pressure, damage,

wear) and frame are in good condition.

Check that all screw connections are

securely fastened. In particular, all

maintenance operations listed in the

maintenance schedule under the

heading “Before each use” must be

carried out. (Ö 15.1)

If necessary, consult a specialist dealer.

VIKING recommends VIKING specialist

dealers.

4.7 Working with your machine

Never work in the vicinity of

other persons, particularly

children, or animals. Ensure

that the grass is never

discharged in the direction of other

persons.

Do not operate the machine in the rain or

during thunder storms, particularly when

there is a risk of lightning strike.

Exhaust gases:

The machine generates

poisonous exhaust gases when

the engine is running. The

gases contain poisonous

carbon monoxide, a colourless and

odourless gas, as well as other pollutants.

The engine must never be operated in

closed or poorly ventilated spaces.

Starting:

The machine must only be started from the

driver's seat.

Start the machine on level ground, not on

a slope.

The engine may only be started in a well

ventilated working area, sufficient

ventilation must be ensured, particularly in

garages.

Before starting the engine, disengage the

cutting tool, attachments and drive and

press down the brake pedal fully.

When starting, it must be ensured that

there is sufficient clearance between the

feet and the cutting tool.

Never start the engine by short-circuiting

the starter terminal. If the normal starter

circuit is bypassed, the ride-on mower may

suddenly be set in motion.

Never start the engine if the smell of petrol

can be detected – Explosive hazard!

Working:

Only work during the day or with good

artificial light.

When driving off the lawn or when not

mowing, the mowing blades must be

disengaged and the mowing deck must be

set to the highest cutting position.

Objects hidden in the turf (lawn sprinkler

systems, posts, water valves, foundations,

electrical wires, etc.) must be avoided.

Never run over any such foreign objects.

Always hold the steering wheel firmly with

both hands when driving.

Particular care must be taken when driving

on lawns and other uneven surfaces, as

the steering wheel can be made to turn

due to holes, mounds, impacts, etc.

Risk of injury to hands and fingers!

If, during operation, a defect in the tank,

tank cap or in the fuel-carrying

components (fuel lines) is detected, the

engine must be stopped immediately. A

specialist dealer must then be contacted.

VIKING recommends VIKING specialist

dealers.

Beware of depressions (holes) in the

terrain and other invisible points of danger.

Obstacles can be easily overlooked in long

grass.

Always drive at a reasonable speed.

Use the machine with great care when

working near slopes, terraces, ditches and

embankments. In particular, ensure that

you maintain sufficient distance to such

danger areas.

Particular care must be taken at points of

poor visibility, bushes, trees and other

obstacles, behind which persons,

especially children, or animals may be

hidden.

Bring the ride-on mower to a standstill

immediately and stop the mowing blade if

someone moves into the area to be mown.

Always monitor the area in front of the

vehicle. Beware of obstacles, in order to

be able to evade them in time.

Danger to life through poisoning!

In the case of nausea, headache,

impaired vision (e.g. decreasing

field of view) hearing disorder,

dizziness, decreasing power of

concentration, stop working

immediately. These symptoms may

be caused by excessively high

exhaust gas concentrations.

Warning – Risk of injury!

Observe the working

area of the mowing

blade. Never put hands

or feet on or underneath

rotating parts. Never touch the

rotating mowing blade. Always

keep away from the discharge

opening. An adequate safety

distance must always be

maintained.

1

MT6112C
I get continuity when i connect M(agneto) and G(round) terminals in Stop position on ignition key, so great. But in the block that connects to it, the slot is empty, and te diagram shows LASBYM without any wire going to M. Could you explain please? Submitted on 16-5-2023 at 16:49
Reply Report abuse
how to remove a flat battery from vikking ride on
Submitted on 2-12-2022 at 16:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Viking MT 6112ZL at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6112ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6112ZL

Viking MT 6112ZL User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info