667332
23
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
21
PTEL
0478 192 9807 C - EN
Activating the choke:
Before starting, pull out the choke knob (1)
to the stop.
Deactivating the choke:
Press in the choke knob to the stop.
8.5 Mowing deck switch (MT 5097,
MT 5097 C, MT 5097 Z, MT 5112 Z)
The mowing deck switch can be used to
engage the mowing deck when the engine
is running and with due regard to all safety
devices (Ö 12.).
Engaging the mowing deck:
Press the top of the mowing deck
switch (1) to the stop.
Disengaging the mowing deck:
Press the bottom of the mowing deck
switch (1) to the stop.
8.6 Mowing deck button (MT 6112 C,
MT 6112 ZL, MT 6127 ZL)
The mowing deck button can be
used to engage the mowing deck
when the engine is running and
with due regard to all safety devices
(Ö 12.).
Engaging the mowing deck:
Press the mowing deck button (1) for at
least 1 second. The mowing deck is
engaged as soon as the "mowing deck
active" symbol (2) appears on the display.
Disengaging the mowing deck:
Press the mowing deck button. The
mowing deck is disengaged as soon as
the "mowing deck active" symbol
disappears from the display.
Avoid damage to the machine.
Do not engage the mowing blade in
tall grass or when set to the lowest
cutting level.
Only activate the mowing deck at
maximum speed (throttle lever in
MAX position).
If necessary, the electronics can be
programmed so that the mowing
deck is automatically disengaged
when the grass catcher box is full.
(Ö 13.8)
Avoid damage to the machine.
Do not engage the mowing blade in
tall grass or when set to the lowest
cutting level.
Only activate the mowing deck at
maximum speed (throttle lever in
MAX position).
23


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-mt-5097

Reset search

  • how do i replace the transmission cable on the Viking MT 5097.oz Serial number 980075680
    Submitted on 4-10-2024 at 18:46

    Reply Report abuse
  • I need to change the ground drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:58

    Reply Report abuse
  • I need to replace the drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:57

    Reply Report abuse
  • Hello,
    We Have a Viking MT 5097Z.
    The engine stopped at once.
    When i turn on the Key to run it, the 10A fuse melts (twice) - not the 15A fuse.
    Is it possible one relay is broken (short-circuit) ? - N° 18,19, 25, 26 on the electric map -
    Or what other possibility?
    Thank's for your answer
    Best regards
    Franck
    Submitted on 4-1-2022 at 12:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097

Viking MT 5097 User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info