667332

Viking MT 5097 Manual

22
Zoom out
Zoom in
Previous page
1/290
Next page
0478 192 9807 C - EN
20
Choke position:
Push throttle lever (1) fully forwards into
the choke position (note detent).
Setting the engine speed:
If the throttle lever (1) is pushed
downwards or upwards, the engine speed
changes and, if the mowing deck is
engaged, the speed of the mowing blades
is changed.
MAX position:
If the throttle lever (1) is moved forwards
towards the MAX marking, the engine
speed is increased.
MIN position:
If the throttle lever (1) is pushed back
towards the MIN marking, the engine
speed is reduced.
8.3 Throttle lever (MT 5097 Z,
MT 5112 Z, MT 6112 ZL, MT 6127 ZL)
Setting the engine speed:
If the throttle lever (1) is pushed
downwards or upwards, the engine speed
changes and, if the mowing deck is
engaged, the speed of the mowing blades
is changed.
MAX position:
If the throttle lever (1) is moved forwards
towards the MAX marking, the engine
speed is increased.
MIN position:
If the throttle lever (1) is pushed back
towards the MIN marking, the engine
speed is reduced.
8.4 Choke knob (MT 5097 Z, MT 5112 Z,
MT 6112 ZL, MT 6127 ZL)
The models MT 5097 Z, MT 5112 Z,
MT 6112 ZL, MT 6127 ZL are equipped
with a choke knob for starting a cold
engine.
Move the throttle lever to the MAX
position during mowing and to start
the engine.
Move the throttle lever to the MAX
position during mowing and to start
the engine. To start a cold engine,
also actuate the choke knob.
Do not use the choke when starting
a warm engine.
As soon as the engine is running,
push the choke knob back to its
initial position.
Never activate the choke when the
engine is running.
… 22 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-mt-5097

Reset search

  • how do i replace the transmission cable on the Viking MT 5097.oz Serial number 980075680
    Submitted on 4-10-2024 at 18:46

    Reply Report abuse

  • I need to change the ground drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:58

    Reply Report abuse

  • I need to replace the drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:57

    Reply Report abuse

  • Hello,
    We Have a Viking MT 5097Z.
    The engine stopped at once.
    When i turn on the Key to run it, the 10A fuse melts (twice) - not the 15A fuse.
    Is it possible one relay is broken (short-circuit) ? - N° 18,19, 25, 26 on the electric map -
    Or what other possibility?
    Thank's for your answer
    Best regards
    Franck
    Submitted on 4-1-2022 at 12:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097

Viking MT 5097 User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info