667331
39
Zoom out
Zoom in
Previous page
1/332
Next page
ENNO
37
SVFIDAPL
0478 192 9803 B - EN
Placing the mowing deck in safe
position for checks:
Lean mowing deck (1) against a wall and
secure against slipping with the foot.
Checking the wear limits:
A = blade thickness
B = blade width
Blade thickness A:
The mowing blade (1) must be at least
4.5 mm thick at all points.
Check the thickness of the blade at several
points using a slide calliper (1).
If the blade thickness is less than 4.5 mm
at any point, the mowing blade must be
replaced.
Blade width B:
Measure the distance (B) using a slide
calliper.
For safety reasons, distance (B) must be
at least 49 mm.
Removing the mowing blade:
Remove the mowing deck. (Ö 12.1)
Lean the mowing deck against a wall
and secure against slipping.
Loosen and remove the blade fastening
screw (1) using an A/F 17 spanner (not
included in standard equipment).
Remove the blade fastening screw (1)
together with retaining washer (2).
Remove the mowing blade (3).
Repeat this procedure on the second
mowing blade.
Sharpening the mowing blade:
The following points must be observed
when re-sharpening mowing blades:
Cool the mowing blade when
sharpening, e.g. with water. The blade
must not be allowed to display blue
colouring, as this would reduce its
cutting quality.
Sharpen blades evenly to prevent
vibration due to imbalance.
The cutting angle of 30° must be
observed.
Observe the wear limits when
sharpening.
Risk of injury:
If the specified wear limits are
reached or exceeded, the mowing
blade must be replaced.
Risk of injury:
Always wear safety glasses and
gloves when sharpening.
Risk of injury:
When resharpening the mowing
blade, it is essential that the wear
limits and the cutting angle of 30°
are observed.
The mowing blade must be
replaced if notches or cracks are
detected, or if the specifications
contained in the section "Checking
the wear limits" are exceeded.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4112SZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4112SZ in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4112SZ

Viking MT 4112SZ User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info