667331
37
Zoom out
Zoom in
Previous page
1/332
Next page
ENNO
35
SVFIDAPL
0478 192 9803 B - EN
13.2 Opening the engine hood
Hold the engine hood (1) with one hand at
the handle (2) and open by pulling gently
upwards.
Fold the engine hood (1) forwards to the
stop.
13.3 Closing the engine hood
Close the engine hood (1) and allow to
engage.
13.4 Lubrication
Lubricate the two front steering knuckles
via the two grease nipples on the front
axle.
Lubricating
Stop the engine. (Ö 11.3)
Remove the ignition key and keep it in a
safe place.
Engage the parking brake. (Ö 8.11)
Unload the front axle by supporting
(lifting) it.
Using a grease gun (not included in
standard equipment), inject grease on
both sides via the grease nipples (1) until
small amounts of grease escape from the
steering knuckles.
Remove escaping lubricating grease.
Remove support for front axle.
Note
During the inspection by the
specialist dealer, the braking
function is checked and, if
necessary, the brakes are serviced.
Furthermore, all required
maintenance operations on the
gearbox are carried out.
Risk of injury:
Switch off the engine and allow it to
cool down for a few minutes before
opening the engine hood.
The engine should be warm to the
touch.
Close the engine cover carefully
and slowly. Ensure that the engine
hood engages.
Note
Before lubricating, the front axle
must be unloaded by supporting
appropriately.
The grease nipple must be cleaned
before lubricating, so that no dirt
enters the steering knuckle.
Escaping grease should always be
removed (wiped off) after
lubricating.
Use commercially available
lubricating grease.
Note
The grease nipple on the right front
wheel is located on the front of the
steering knuckle.
The grease nipple on the left front
wheel is located on the rear of the
steering knuckle.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4112SZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4112SZ in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4112SZ

Viking MT 4112SZ User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info