Manual Viking MT 4097SX (page 25 of 332) (English, Danish, Polish, Swedish, Norwegian, Finnish)

667328

Zoom out

Zoom in

1/332

ENNO

SVFIDAPL

0478 192 9803 B - EN

● Adjust the driving speed to the condition

of the lawn. (Ö 8.9)

● Select an appropriate cutting level – do

not mow too low. (Ö 11.6)

Driving direction when mowing:

During the mowing operation, an

appropriate driving direction must be

observed.

Always select the mowing direction so that

the clippings are ejected onto the already

mown lawn area. This ensures that the

clippings are ejected and distributed

evenly. Moreover, overloading of the

machine owing to excessive quantities of

grass is prevented.

Example:

Mowing in spiral pattern

● Begin from the outer edge of the lawn

and work you way inwards.

● Select an anti-clockwise driving

direction.

Preventing blockage of the mowing

deck / of the discharge opening:

In order to prevent blockage of the mowing

deck discharge opening, it should be

regularly checked visually during mowing

and cleaned if necessary.

If the mowing deck discharge opening

frequently becomes blocked with grass,

reduce the driving speed or select a higher

cutting level.

If the problem persists, the probable cause

is blunt mowing blades or damaged or

worn wings on the mowing blades.

Sharpen or replace the mowing blades.

Furthermore, the inside of the mowing

deck, the mowing deck discharge opening

and the mowing blades should be carefully

cleaned after each use to prevent the

accumulation of grass deposits.

Fertilising:

Mowing the grass deprives the ground of

permanent nutrients, which can be

returned by using a high-grade, long-term

lawn fertiliser. Usually, fertilising three

times per mowing season is necessary.

For this purpose, the lawn should be dry,

so that the fertiliser does not stick to the

grass blades and burns them. It is then

better to water the lawn, which results in

the fertiliser being flushed off the grass

blades. (observe manufacturer's

instructions for use.)

Ground-conserving working:

The most important factors for ground-

conserving working are operating

technique and ground moisture.

In order to achieve clean mowing results,

the driving speed must be adapted to the

condition of the grass to be mowed (to the

height and density) and to the moisture of

the lawn.

Executing curves that are too tight

increases the loading on the turf and leads

to poor mowing results, particularly on wet

grass, as the wheels sink into the soft

grass.

The mowing operation is performed

anti-clockwise, from the outside

inwards. This ensures that the

clippings are ejected onto the

already mown lawn area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4097SX in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4097SX

Viking MT 4097SX User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MT 4097SX Manual

Product: