667328
23
Zoom out
Zoom in
Previous page
1/332
Next page
ENNO
21
SVFIDAPL
0478 192 9803 B - EN
The brake pedal returns to the initial
(unactuated) position. The parking
brake is deactivated and the rear
wheels are no longer blocked.
8.12 Cutting height adjustment lever
Seven cutting levels can be set using the
cutting height adjustment lever.
Unlocking the cutting height
adjustment lever:
Releasing with mowing deck installed:
Pull the cutting height adjustment lever (1)
inwards (towards the driver's seat) and
hold.
Releasing with mowing deck removed:
Press the cutting height adjustment
lever (1) downwards slightly and hold.
Pull the cutting height adjustment lever (1)
inwards (towards the driver's seat) and
hold.
The cutting height adjustment lever is
unlocked and the cutting level can be
adjusted.
Locking the cutting height adjustment
lever:
Slowly guide the cutting height adjustment
lever (1) outwards with the hand until the
cutting height adjustment lever engages in
a notched position.
8.13 Gearbox freewheel lever
The gearbox can be
disengaged (e.g. for
pushing the machine) or
engaged (for self-
propulsion) by means of the gearbox
freewheel lever.
Disengaging the gearbox:
Pull the gearbox freewheel lever (1)
outwards to the stop.
Risk of injury:
Hold the lever firmly at the handle
before releasing the cutting height
adjustment lever.
For safety reasons, only unlock the
cutting height adjustment lever
when the machine is at a standstill.
The release procedure for the
cutting height adjustment lever
depends on whether the mowing
deck is installed or removed.
Warning!
Risk of crush injuries!
The gearbox freewheel lever
should only be pulled out on level
surfaces, as the machine may be
set in motion.
If the machine is parked with the
gearbox disengaged, the parking
brake must always be engaged.
Note
The gearbox freewheel lever is
located behind the right-hand rear
wheel.
The gearbox freewheel lever
should only be pulled out when the
ride-on mower is to be pushed.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 4097SX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 4097SX in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 26,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 4097SX

Viking MT 4097SX User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 350 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info