693194

Viking MB 455 C Manual

18
Zoom out
Zoom in
Previous page
1/148
Next page
12
0478 105 9821 K - EN
Adjusting the drive
cable
The cable is correctly
adjusted in new units. The
cable may have to be re-
adjusted due to wear of the
clutch.
For this purpose, an
adjustment screw is provided
on the panel.
Correct adjustment:
Actuate the drive lever while
pulling the lawn mower
backwards.
The driving wheels must lock
after approx. one third of the
lever travel.
24
CAUTION
Risk of injury.
Adjustment is carried out
with the engine stopped.
Combustion engine
Maintenance interval:
See engine instruction
manual
Observe the operating and
maintenance instructions
contained in the accompa-
nying engine instruction
manual. To achieve a long
service life, it is always
particularly important to
maintain a sufficient level of
oil and to change the oil and
air filter regularly.
The cooling ribs must always
be kept clean to ensure that
the engine is adequately
cooled.
Wheels and wheel drive
Maintenance interval:
Once a year
Plastic ball bearings are
maintenance-free. The metal
ball bearings should be
lubricated at least once a
year with resin-free grease
or oil.
Your dealer will be happy to
assist you.
The gearbox is maintenance-
free. (MB 455/ M/ E/ C/ BC)
Mowing blade
maintenance
Maintenance interval:
Every 25 operating hours
If mowing results deteriorate
with time, the mowing blade is
probably blunt.
Risk of injury!
Always wear
gloves.
25
Removing the mowing
blade
ACHTUNG
Risk of injury!
If you do not have the
necessary expertise or
auxiliary equipment, please
always contact your dealer.
In the interests of safety,
only use original VIKING
spare parts.
For removal, use a
25= wooden block (approx.
60 x 60 mm) to
counterhold the
24= mowing blade.
Loosen the
26= blade fastening screw(s)
using an A/F 17 spanner
and remove together with
the
27= retaining washer (not
fitted on MB 455 BC).
Remove the
24= mowing blade.
MB 450 M, MB 455 M:
The
24= mowing blade consists of
an upper blade (24a) and
a lower blade (24b). It can
be separated for
convenient regrinding.
Push the upper blade
(24a) to the left as far as
the stop and then lift the
opposite side.
The upper blade (24a) is
then disengaged from the
lower blade (24b) by
pushing to the right.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 455 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 455 C in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info