693194
16
Zoom out
Zoom in
Previous page
1/148
Next page
10
0478 105 9821 K - EN
Starting engine/ blade,
MB 455 BC
Starting the engine:
Set the
D= throttle lever to the MAX
position.
Pull out
G= starter cable slowly to the
point of resistance and
then pull vigorously to
arm's length.
Slowly release the cable
so that it can gradually be
rolled up by the starter.
Repeat until the engine
starts.
19
NOTE
Do not start the blade in
high grass and only start it
at maximum engine speed.
Press
C= blade stop lever in
direction of arrow.
Pull back
A= blade clutch lever straight
in direction of handlebar
(= direction of arrow).
NOTE
Pull back blade clutch lever
quickly to avoid
unnecessary wear in the
blade clutch.
Starting the blade:
Risk of injury!
If the function test fails
(continued audible wind
noise despite relasing the
handlebar), shut off the
engine, detach the spark
plug socket and contact an
authorised dealer (VIKING
customer service).
Start the engine
as described in the
instruction manual.
Engage the blade
as described in the
instruction manual.
A running blade generates
a clearly audible wind noise.
The running of the blade can
be checked by means of the
wind noise generated.
Release the handlebar.
The blade brake clutch
disengages the blade from
the engine drive, causing a
braking action. The blade
quickly comes to a standstill.
This procedure causes the
wind noise to cease. No wind
noise is audible when the
blade is stopped.
Checking the BBC
Before starting work, always
perform the following function
test three times:
Stopping the engine
MB 400, MB 450/ M,
MB 455 M/ E/ C
To stop the engine,
release
C= motorstop lever;
the engine and the
mowing blade come to a
complete standstill after a
short run-down time.
18
MB 455 E:
C= motorstop lever.
21= Turn the ignition key to
the right. Actuate the
starter for no longer than
three to five seconds,
pausing for the same
amount of time between
attempts.
When the engine starts,
release the ignition key.
Avoid repeat starting
when the engine is
running.
CAUTION
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 455 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 455 C in the language / languages: English, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info