667285
5
Zoom out
Zoom in
Previous page
1/8
Next page
Technical Information 15.01
- Page 5 -
IMPORTANT
5.2 Sharpening the mowing blades
5.3 Combustion engine
To achieve a long service life it is always particularly
important to have a sufficient level of oil and to
change the oil and air filters regularly (see engine
instruction manual).
The cooling fins must always be kept clean to
ensure that the engine is adequately cooled.
2
1
1
2
max. 5 mm
1
2
3
50 Nm
2
Maintenance interval: Every 25 hours of
operation
If mowing results deteriorate over time, the mowing
blade is probably blunt.
Mower blade disassembly:
Use a wood block 1 (approx. 60 x 60 mm) for disas-
sembly, to counterhold the mowing blade
(see illus.).
Release blade bolt 2.
The following points must be observed when re-
sharpening the blade:
Cool blade when sharpening, e. g. with water.
The blade must not be allowed to display blue
colouring, as this would reduce its cutting quality.
Sharpen blade evenly to prevent vibration due to
imbalance.
Check blades for damage before installing.The
blade must be replaced if notches or cracks are
identified, or if the blades are sharpened back by
5 mm (wear limit).
Mower blade installation:
Install the mowing blade with the vanes pointing
upwards into the housing channel.
For installation, use a wooden block 1
(approx. 60 x 60 mm) to counterhold the mowing
blade (see illus.).
Secure bolt 2 with retaining washer 3 to a torque of
50 Nm.
Observe the specified torque when tightening the
blade bolt, as the secure attachment of the cutting
mechanism depends on it.
1
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 410 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info