667223

Viking MB 248T Manual

37
Zoom out
Zoom in
Previous page
1/269
Next page
35
DEFRNLITESPTNOSVFIDASKCSEL EN
0478 111 9922 B - EN
7.2 Assembling the handlebar
● Insert flat head bolt (E) through cable
guide (F).
● Attach cable guide (F) to motorstop
cable (2).
● MB248T, MB253T:
Also attach cable guide (F) to self-
propulsion cable (3).
● Fit upper handlebar (1) onto the outside
of lower handlebar sections (4) as
shown.
● Insert flat head bolts (E) – on left with
cable guide (F), on right without –
through bores from the inside and
tighten with rotary handles (D).
7.3 Attaching and detaching the
recoil starter rope
Attaching:
● Detach the spark plug socket from the
engine.
● Press the motorstop lever (1) to the
handlebar and hold.
● Slowly pull out the recoil starter rope (2)
and attach it to the rope holder (3).
● Slowly release the recoil starter rope (2)
and motorstop lever (1).
● Connect the spark plug socket.
Detaching:
● Detach the spark plug socket from the
engine.
● Press the motorstop lever (1) to the
handlebar and hold.
● Slowly pull out the recoil starter rope (2)
and detach it from the rope guide (3).
● Slowly return the recoil starter rope (2)
and release the motorstop lever (1).
● Connect the spark plug socket.
7.4 Folding down the upper
handlebar
The upper handlebar (1) can be
folded down for space-saving transport
and storage of the mower.
● Detach the recoil starter rope. (Ö 7.3)
● Release the rotary handle (3) on each
side (by turning anti-clockwise).
● Slowly fold the upper handlebar (1)
forwards.
7.5 Assembling grass catcher
box
● Fit upper part of grass catcher
box (B) onto lower part of grass catcher
box (C).
● Check for correct seating:
The tabs (1) must be located exactly
over the openings (2).
All tabs (1) and guide lugs (3) must be
located on the inside.
The upper part of the grass catcher box
(B) must completely surround the lower
part of the grass catcher box (C) on the
outside.
● Starting from the rear centre, press tabs
(1) into openings (2) in the lower part of
the grass catcher box from the outside,
using slight pressure.
7.6 Removing and attaching the
grass catcher box
Attaching:
● Open the discharge flap (1) and hold it
open.
● Attach grass catcher box (2) to
mountings (4) on rear of machine by
means of locating lugs (3).
Ensure that flap (5) is properly closed.
● Release the discharge flap (1).
Detaching:
● Open the discharge flap (1) and hold it
open.
Danger of pinching!
Hold the upper handlebar (1) with
one hand at its highest point when
screwing in the two rotary
handles (D).
3
4
Risk of injury!
Stop the engine before folding
down the upper handlebar and
detach the spark plug socket.
No additional loads must be placed
on the upper handlebar (1) (e.g.
hanging work clothing over the
upper handlebar).
Danger of pinching!
The upper handlebar (1) can fold
down on its own when the two
rotary handles (3) are released.
Therefore hold the upper
handlebar (1) at its highest point
before releasing the two rotary
handles (3).
1
Risk of injury!
The engine must be stopped
before attaching or removing the
grass catcher box.
5
6
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 248T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 248T in the language / languages: All languages as an attachment in your email.

The manual is 11,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info