594797
12
Zoom out
Zoom in
Previous page
1/22
Next page
GB GB
Bardot Operation Guide
23
Bardot Operation Guide
22
Using FM Mode
Selecting FM Mode
1. Press the SOURCE button repeatedly until FM is displayed.
2. On rst use the display will show 87.50MHz, the start of the FM frequency range. Otherwise, the last
listened-to FM station will be selected.
Scanning for FM Stations
1. To manually scan FM stations, while frequency is displayed, turn the –TUNING+ knob clockwise/
anticlockwise to increase/decrease frequency by 0.05MHz per step.
2. To automatically scan, turn the –TUNING+ knob clockwise or anticlockwise and then press the –TUNING+
knob.
Your Bardot will scan forwards or backwards until it reaches the next available station. To scan forwards,
turn the –TUNING+ knob clockwise before pressing it. To scan backwards turn the –TUNING+ knob
anticlockwise before pressing it.
Setting Scan Preferences
By default, FM scans stop at any available station. This may result in tuning to a weak station, resulting in
poor sound quality. Your Bardot helps you avoid weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press the MENU button,
turn the –TUNING+ knob to select Scan Setting, and then press the –TUNING+ knob to conrm.
2. Turn the TUNING+ knob to select ‘Strong stations only’, and press the –TUNING+ knob to conrm your
selection.
Forcing mono for weak stations
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in poor sound
quality. Your Bardot can offset this effect by playing weak stations in mono.
1. To play weak stations in mono, press the MENU button, turn the –TUNING+ knob to select Audio setting,
and then press the –TUNING+ knob to conrm.
2. Turn the –TUNING+ knob to select ‘Forced mono’ and press the –TUNING+ knob to conrm.
3. To exit manual tune, press the –TUNING+ knob again.
Setting Dynamic Range Control (DRC)
You can set the compression level of stations to eliminate the differences in dynamic range or sound level
between radio stations. If loud stations are too loud while quiet stations are too quiet, DRC may help.
Note: DRC off indicates no compression
DRC low indicates little compression
DRC high indicates maximum compression
1. Press the MENU button, turn the –TUNING+ knob to select DRC, and press the –TUNING+ knob to conrm.
2. Turn the –TUNING+ knob to select ‘DRC high, ‘DRC low’ or ‘DRC off, and then press the –TUNING+ knob to
conrm your setting.
Changing Station Display Order
You may want to display your stations in a different order. Your options are:
Alphanumeric: Display all stations in alphanumeric order.
Ensemble: List currently broadcasting active stations before inactive ones.
Valid: Remove inactive stations from the station list.
1. Press the MENU button, turn the TUNING+ knob to select Station order, and then press the TUNING+
knob to conrm.
2. Turn the TUNING+ knob to select ‘Alphanumeric’, ‘Ensemble’ or ‘Valid’, and then press the TUNING+ knob
to conrm your selection.
Pruning Your Station List
This feature enables your radio to remove inactive stations from the station list.
1. Press the MENU button, turn the TUNING+ knob to select Prune, and then press the TUNING+ knob to
conrm.
2. Turn the –TUNING+ knob to ‘Yes’, and then press the –TUNING+ knob to conrm.
Viewing Station Information
To view currently playing station information, press the INFO button repeatedly to cycle through DLS
(Dynamic Label Segment), Signal Strength, Program Type, Ensemble, Program Frequency, Signal Quality,
Bitrate, Codec and Time and Date.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for View Quest Bardot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of View Quest Bardot in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of View Quest Bardot

View Quest Bardot User Manual - German - 19 pages

View Quest Bardot User Manual - Dutch - 19 pages

View Quest Bardot User Manual - French - 19 pages

View Quest Bardot User Manual - Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info