594797
11
Zoom out
Zoom in
Previous page
1/22
Next page
GB GB
Bardot Operation Guide
21
Bardot Operation Guide
20
2. Once the scanning is complete the DAB/DAB+ stations will be displayed in alphanumeric order. The rst
station in the list will be selected.
Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a
stronger signal area. Websites such as www.ukdigitalradio.com in the UK feature handy postcode
nders that will tell you what DAB channels you can expect to receive.
Selecting another DAB/DAB+ Station
While a program is playing, turn the –TUNING + knob to cycle through available stations, and then press
the –TUNING + knob to conrm the station you want to play.
Updating the Stations List
Press the MENU button, turn the –TUNING+ knob to select Full scan, and then press the –TUNING + knob
to conrm. Scan will commence.
Displaying Signal Strength
While playing a DAB/DAB+ program, repeatedly press the INFO button until the display shows a signal bar
indicating the strength of the current station.
Manual Tuning
1. Press the MENU button, turn the –TUNING+ knob to select Manual tune, and then press the
TUNING+ knob to conrm. The display will show the channel number and frequency.
2. Turn the –TUNING+ knob to step through the channels and then press the –TUNING+ knob to select the
current channel.
Note: If there is a multiplex corresponding to this channel and frequency, then after a few
seconds the display will show a tuning meter with the signal strength and the multiplex.
Getting Started
Carefully remove your Bardot from its box. You may wish to store the packaging for future use.
Inside the box you will nd:
- Your Bardot
- Power Adapter with plugs for UK and mainland Europe
- User Manual
Positioning your Bardot
Place your Bardot on a at / stable surface, with reference to the safety information section in this manual.
Adjusting the Aerial
The aerial should be extended to ensure you receive the best signal possible in both DAB and FM radio
modes. Later on it may be necessary to alter the position of your Bardot and its aerial to achieve the best
reception.
Turning the Unit On and Off
1. Connect the plug at the end of power adapter cable to the DC in jack on the back of your Bardot. Insert
the power adapter into the mains socket.
2. Turn the mains power on and then press the POWER button to turn on the unit.
Pressing the POWER button again switches your Bardot to standby mode. To switch the unit off
completely, unplug the power adapter from the mains socket.
Volume Control
Adjust the radio volume by turning the – VOLUME + knob.
Using DAB Mode
Note: When you turn on the radio it will automatically search and store all the available
stations. You should conduct an additional Full Scan to ensure all stations are picked up and
stored. It is also recommended every few months to run a new scan to pick up any new DAB/
DAB+ stations that may have begun broadcasting after purchasing your Bardot.
1. Repeatedly press the SOURCE button until DAB is shown on the display. For the rst time your Bardot
will carry out a full scan and store a list of stations in memory.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for View Quest Bardot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of View Quest Bardot in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of View Quest Bardot

View Quest Bardot User Manual - German - 19 pages

View Quest Bardot User Manual - Dutch - 19 pages

View Quest Bardot User Manual - French - 19 pages

View Quest Bardot User Manual - Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info