813781
44
Zoom out
Zoom in
Previous page
1/112
Next page
44
Note
To ensure the bypass works correctly, set the room
temperature for ventilation as follows:
Vitovent 200-C:
Set the value approx. 2 °C higher than the standard
temperature for central heating/central cooling and
"Party mode".
All other ventilation units:
Set the value no more than 4 °C higher or lower
than the standard temperature for central heating/
central cooling and "Party mode".
We recommend setting the value to at least 1 °C
higher.
Standard room temperature for central heating/central
cooling and "Party mode": See pages 26 and 31.
1. Extended menu:
2. "Ventilation"
3. "Set room temperature"
4. Set the required value.
Note
This menu is not available if your heating circuit HC1 is
a ventilation heating circuit.
Setting the minimum temperature for ventilation
Applies to Vitovent 200-C and Vitovent 300-F only.
Factory setting: 16 °C
As soon as the outdoor air temperature at the inlet to
the ventilation unit exceeds the minimum temperature
set here, ventilation without heat recovery can take
place.
Note
The lower the setting for this temperature, the higher
the risk of condensate build-up on the outside of the
ductwork. This condensate build-up can cause dam-
age to the building.
1. Extended menu:
2. "Ventilation"
3. "Min supply air t. byp"
4. Set the required value.
Setting a time program for ventilation
In the time program for ventilation you set the time
phrases during which your home is ventilated and at
what air flow rate.
To do so, select an operating status for each time
phase: See chapter "Operating status for ventilation".
Factory setting: one time phase from 00:00 to 24:00 h
for every day of the week with the "Standard" operat-
ing status
Note
We recommend maintaining the factory setting, par-
ticularly if your heating circuit HC1 is a ventilation
heating circuit.
The time program for ventilation is only active in the
"Ventilation program" operating program.
1. Extended menu:
2. "Ventilation"
3. "Time prog ventilation"
4. Set the required time phases and operating status.
To see how to set a time program: See page 23.
Note
Between the set time phases, mechanical ventilation
takes place with the minimum air flow rate (
1
).
Operating status for ventilation
"Reduced" (
2
)
Reduced air flow rate:
Approx. 70 % of the standard flow rate: see "Stand-
ard".
"Standard" (
3
)
Standard air flow rate
"Intensive" (
4
)
Maximum air flow rate:
Approx. 125 % of the standard flow rate: see
"Standard".
Mechanical ventilation
Ventilation without heat recovery (cont.)
5817913
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann VITOTRONIC 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann VITOTRONIC 200 in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 User Manual - German - 112 pages

Viessmann VITOTRONIC 200 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info