Manual Viessmann Vitotronic 200 - WO1C (page 28 of 112) (English)

813833

Zoom out

Zoom in

1/112

System with heating water/coolant buffer cylinder

A heating water/coolant buffer cylinder can either heat

or cool your heating/cooling circuits.

To heat your home, you must switch on central heating

via the heating water/coolant buffer cylinder. To cool

your home, you must switch on central cooling via the

heating water/coolant buffer cylinder.

Note

■Simultaneous central heating and central cooling is

not possible.

■Central cooling via a separate cooling circuit is not

possible.

Switching on central heating for heating water/

coolant buffer cylinder

1. Extended menu:

2. "System"

3. "Buffer cyl operating mode"

4. "Heating mode"

Switching on central cooling for heating water/

coolant buffer cylinder

1. Extended menu:

2. "System"

3. "Buffer cyl operating mode"

4. "Cooling mode"

Setting the time program for central heating with buffer cylinder

In the time program for central heating with buffer cyl-

inder, you set the time phases in which your buffer cyl-

inder is heated and to what temperatures. In addition,

you specify whether the entire volume of the buffer cyl-

inder or just the top section is heated.

When setting the time program, you select an operat-

ing status for each time phase: See chapter "Operating

status for heating the buffer cylinder".

Note

This time program applies either to a heating water

buffer cylinder or to a heating water/coolant buffer cyl-

inder in heating mode.

Factory setting: One time phase from 00:00 to 24:00 h

for every day of the week with the "Standard" operat-

ing status

■The time phases for heating the buffer cylinder must

cover all time phases for central heating (for all heat-

ing circuits).

■If you switch off heating of the heating water buffer

cylinder with the time program (all time phases are

deleted "- - : - -"), your rooms will not be heated.

■We recommend that the buffer cylinder should be

heated continuously.

1. Extended menu:

2. "System"

3. "Time prog buffer cyl"

4. Set the required time phases and operating status.

To see how to set a time program: See page 23.

Note

■The buffer cylinder is not heated between the time

phases. Only frost protection for the buffer cylinder is

active.

■When setting the time program, please bear in mind

that your heat pump requires some time to heat the

buffer cylinder to the required temperature.

Operating status for heating the buffer cylinder

"Standard"

■The entire volume in the buffer cylinder is heated to

the highest set flow temperature for all connected

heating/cooling circuits.

■The set flow temperature of a heating/cooling circuit

results from the heating curve, the outside tempera-

ture and the required room temperature.

"Reduced"

■The top section of the buffer cylinder is heated to the

highest set flow temperature for all connected heat-

ing/cooling circuits.

■The set flow temperature of a heating/cooling circuit

results from the heating curve, the outside tempera-

ture and the required room temperature.

"Fixd value"

■The entire volume in the buffer cylinder is heated to

a fixed temperature.

Factory setting: 50 °C

Your contractor may have adjusted this value.

■You can utilise the "Fixd value" operating status,

e.g. to heat the buffer cylinder to a higher tempera-

ture with economical night tariff power.

Central heating/central cooling

Central heating/central cooling with buffer… (cont.)

5817913

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotronic 200 - WO1C in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotronic 200 - WO1C

Viessmann Vitotronic 200 - WO1C User Manual - German - 112 pages

Viessmann Vitotronic 200 - WO1C User Manual - Dutch - 112 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viessmann Vitotronic 200 - WO1C Manual

Product: