Manual Viessmann Vitotronic 200 - WO1C (page 27 of 112) (English)

813833

Zoom out

Zoom in

1/112

In the time programs for central heating and central

cooling you set the time phrases during which your

home is heated or cooled and to what temperature.

To do so, select an operating status for each time

phase: See chapter "Operating status for central heat-

ing/central cooling".

Factory setting: one time phase from 00:00 to 24:00 h

for every day of the week with the "Standard" operat-

ing status.

Note

■The factory setting is suitable for operation with

underfloor heating systems.

■No time program can be set for a separate cooling

circuit.

1. Extended menu:

2. "Heating" or "Heating/cooling"

3. If applicable, use / to select the required heating/

cooling circuit

4. "Time program heating" or "Time proghtg/cool-

ing"

5. Set the required time phases and operating status.

To see how to set a time program: See page 23.

Note

■Between the time phases, rooms are neither heated

nor cooled. Only the heat pump frost protection is

active ("Standby" operating status).

■When making settings, please bear in mind that your

heating system requires some time to heat or cool

the rooms to the required temperature.

Operating status for central heating/central cooling

"Standard"

■Central heating/central cooling takes place to the

standard room temperature "Set room tempera-

ture": See page 26.

"Reduced"

■Central heating/central cooling takes place to the

reduced room temperature "Set red. room temp":

See page 26.

Note

In the "Reduced" operating status, a heating/cooling

circuit is not cooled.

"Fixd value"

■Central heating takes place with the max. permissi-

ble flow temperature of the respective heating circuit,

irrespective of the outside temperature.

■Central cooling takes place with the min. flow tem-

perature of the respective heating circuit, irrespective

of the outside temperature.

■Factory settings: Your contractor may have adjusted

these values.

–Max. heating flow temperature: 40 °C

–Min. cooling flow temperature: 20 °C

Central heating/central cooling with buffer cylinder

Note

Further information regarding the different buffer cylin-

ders can be found in chapter "Terminology" in the

Appendix: See page 92.

Switching on central heating/central cooling with buffer cylinder

System with heating water buffer cylinder

For central heating, the heating water buffer cylinder

supplies your heating/cooling circuits with heat. The

heat pump heats the heating water buffer cylinder

automatically, as soon as the outside temperature

falls below the heating limit. This heating limit has

been set by your contractor.

For central cooling (if installed), the heat pump sup-

plies the cooling circuit directly, not via the heating

water buffer cylinder. Central cooling is automatically

switched on if the outside temperature rises above the

cooling limit. The cooling limit has also been set by

your contractor.

Central heating/central cooling

Setting the time program for central heating/central cooling

5817913

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotronic 200 - WO1C in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotronic 200 - WO1C

Viessmann Vitotronic 200 - WO1C User Manual - German - 112 pages

Viessmann Vitotronic 200 - WO1C User Manual - Dutch - 112 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viessmann Vitotronic 200 - WO1C Manual

Product: