813833

Viessmann Vitotronic 200 - WO1C Manual

10
Zoom out
Zoom in
Previous page
1/112
Next page
10
Brine/water heat pumps
Brine/water heat pumps utilise geothermal energy to
generate heat. The geothermal energy is transferred to
the refrigerant circuit using a heat transfer medium
(brine). Here, the temperatures necessary for central
heating and DHW heating are generated. Here too, a
compressor drives the refrigerant circuit.
To provide central cooling, the heat pump extracts heat
from your rooms and transfers it to the ground.
Brine/water heat pumps are installed inside the build-
ing.
Note
Brine/water heat pumps can have two stages. Two-
stage brine/water heat pumps have 2 compressors
which can be activated individually or simultaneously
subject to the requested heating output.
Depending on heat pump type, the two compressors
can be installed in a single casing or in 2 adjacent cas-
ing units. Both compressors are controlled by one
shared heat pump control unit.
Water/water heat pumps
Water/water heat pumps utilise e.g. groundwater to
generate heat, following the same principle as brine/
water heat pumps. The energy from the groundwater
reaches the refrigerant circuit via a heat transfer
medium.
With auxiliary components, a brine/water heat pump
can be used as a water/water heat pump.
Water/water heat pumps are installed inside the build-
ing.
Equipment and functions
The heat pump types differ in their equipment levels:
■DHW cylinder
■Electric booster heater (instantaneous heating water
heater)
■High efficiency circulation pumps
■…
The heat pump types differ in the available functions:
■Number of heating circuits
■Solar DHW heating
■Central cooling
■Noise reduction
■Output control
■Utilisation of power generated on site
■Utilisation of excess power from the grid (Smart Grid)
■…
Your contractor will have listed the equipment and
functions of your heating system in the form on
page 102.
Mechanical ventilation systems
Mechanical ventilation systems provide controlled ven-
tilation of detached houses or apartments.
If your Viessmann system includes mechanical ventila-
tion, the central ventilation unit can be controlled and
operated by the heat pump control unit.
Ventilation operation adapts automatically to your
requirements via a time program. "Economy mode"
and the "Holiday program" help you to save energy.
With "Intensive operation", you increase the air
changes in the building and quickly expel odours and
moisture to the outside.
The following central ventilation units are supported:
Vitovent 200-C
Vitovent 200-C is suitable for detached houses or
apartments with up to 120 m2 of living space.
Vitovent 200-C meets the requirements for passive
house use.
The ventilation unit can either be mounted on a wall or
installed on the ceiling.
As well as being controlled by the heat pump control
unit, ventilation can also be activated by a switch or
button (bathroom switch) connected to the ventilation
unit, e.g. if you need the highest ventilation level for a
short period.
Vitovent 200-W
Vitovent 200-W is suitable for detached houses or
apartments with up to 230 m2 of living space.
This ventilation unit is mounted on a wall.
To prevent moisture damage to the building, the venti-
lation unit adjusts the air changes automatically,
depending on the relative humidity in your rooms
(accessories required).
Vitovent 300-C
Vitovent 300-C is suitable for detached houses or
apartments with up to 90 m2 of living space.
Introductory information
Product information (cont.)
5817913
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann Vitotronic 200 - WO1C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann Vitotronic 200 - WO1C in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann Vitotronic 200 - WO1C

Viessmann Vitotronic 200 - WO1C User Manual - German - 112 pages

Viessmann Vitotronic 200 - WO1C User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info