652089

Viessmann 5243 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Programmierung mit Märklin Central
Station und Mobile Station
MitderCentralStationundderMobileStationvon
MärklinkönnenSiedieRegisterprogrammieren.
MitdemHilfsregister#62könnenSieauchEin-
gabewerteüber80eingeben.RufenSiedazudie
Artikel-Nr. 29750 aus der Lokdatenbank auf und
programmierenSiedenDecoderdannso,wiefür
dieseArtikel-Nr.inderAnleitungderCentralStati-
onoderderMobileStationbeschrieben.
Programmierung mit Motorola-Zentralen
StellenSiedieLokaufeinGleis,dasmitdem
Gleis-ausgangderZentraleverbundenist.Esdarf
keinweiteresFahrzeugaufdemGleisstehen,da
derdarinbendlicheDecodersonstggf.ebenfalls
programmiert wird.
Beachten Sie:WennSieeineZentraleeinsetzen,
diesowohldasDCC-alsauchdasMotorola-For-
matsendet,istdieProgrammierungdesDecoders
imDCC-Formatempfehlenswert.Siekönnenden
DecodernachdemProgrammierenauchimMoto-
rola-Format ansteuern.
FührenSieeinenResetanderZentraledurch
(durchgleichzeitigeslängeresDrückenderTasten
„stop“und„go“)oderschaltenSiedieZentrale
kurzausundwiederein.WählenSiezunächstdie
aktuelle Adresse des Decoders oder die Adresse
„80“(wennSiez.B.dieaktuelleAdressedesDe-
codersnichtkennen).BeiderAuslieferunghatder
Decoder die Adresse „3“. Stellen Sie alle Funkti-
onen(function,f1bisf4)auf„off“.
Drücken Sie als nächstes die Taste „stop“ der
Zentrale.BetätigenSiedanndenRichtungsum-
schalter und halten Sie ihn gedrückt. Drücken Sie
kurzdieTaste„go“.SobalddieBeleuchtungdes
Fahrzeugs,dieandenAusgängenAUX1oder
AUX2angeschlossensind,blinken(nachca.2
Sekunden),bendetsichderDecoderimPro-
grammiermodusundSiekönnendenUmschalter
loslassen.
ImProgrammiermoduskönnenSiedieRegister
desDecoderswiefolgtprogrammieren:
1. WählenSieeinRegisterzumProgrammieren
aus,indemSiedieNummerdesRegistersals
Motorola-LokadresseanIhrerZentraleeinge-
ben.BeachtenSie,dassbeimanchenZentra-
len eine führende „0“ eingegeben werden muss.
2. BetätigenSiedenRichtungsumschalter.Die
Beleuchtung blinkt schneller.
3. GebenSiedengewünschtenWertdesRegi-
stersein,indemSiedenWertalsMotorola-
Lok-adresseanIhrerZentraleeingeben.
4. BetätigenSiedenRichtungsumschaltererneut.
DieBeleuchtungfängtwiederanzublinken.
MärklinisteineingetragenesWarenzeichender/is a registered
trademark ofGebr.Märklin&CieGmbH,Göppingen.
MotorolaisteinengetragenesWarenzeichender/is a registered
trademark ofMotorolaInc.,Tempe-Phoenix/Arizona(USA).
no.29750fromthelocomotivedatabaseandpro-
gramthedecoderasdescribedforthisarticlein
theCentralStation´sorMobileStation´smanual.
Programming with Motorola central units
Putthelocomotiveonatrackovaloratracksec-
tionconnectedtothecentralunit’strackoutput.
Makesurenoothervehiclethantheoneyouin-
tend to program is set on the track as the decoder
insidethisvehiclemightbeprogrammedaswell.
Please note:Ifyouuseacentralunitforboth
DCCandMotorolaformatitisrecommendedto
programthedecoderintheDCCformat.After
havingnishedprogrammingthedecoderitis
possibletocontrolitinMotorolaformataswell.
Resetthecentralunit(bysimultaneouslypush-
ingthebuttons“stop”and“go”forsometime)or
quicklyswitchthecentralunitoffandon.First
enterthecurrentaddressortheaddress“80”(e.g.
ifyoudonotknowthecurrentaddress).Manufac-
turerssettingis“3”.Setallfunctions(function,f1
tof4)to“off”.
Pushthe“stop”buttonatthecentralunit.Next,
operatethedirectionswitchandholditinthat
positionwhilebrieypushingthe“go”button.
Assoonasthelampsconnectedtotheoutputs
AUX1orAUX2ash(afterapprox.2seconds)the
decoder is in the programming mode and you an
releasethedirectionswitch.
Afterhavingstartedtheprogrammingmode(and
whenthelocomotive´slightingashes)youcan
programthedecoder´sregistersasfollows:
1. Choosetheregisteryouwanttoprogrammby
settingtheregister´snumberwiththeMotorola
locomotiveaddressatyourcentralunit.Please
notethatwithsomecentralunitsaleading“0”
hastobeentered.
2. Operatethedirectionswitch.
Thelightingashesfaster.
3. Setthedesiredvalueoftheregisterbysetting
theregister´svalueasMotorolalocomotivead-
dressatyourcentralunit.
4. Operatethedirectionswitchagain.Thelighting
startsashingagain.
Repeatthesteps1to4forallregistersyouwant
to program. In order to choose a register for pro-
grammingortoenteravalueforaregisteryou
havetoconrmtheenterednumberlikeselect-
ingaMotorolalocomotiveaddress.Thelighting
showswhichkindofentrythedecoderexpects:
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 5243 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 5243 in the language / languages: English, German as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info