652076
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Fig. 10
Abb. 10
10.1 10.2 10.3
Fig. 11
Abb. 11
11.1 11.2 11.3
Tillig H0 Elite
Hebel: 8 und 11
Montage: oberur,nebenGleis
1. Montieren Sie die Hebel gemäß Abbildung 10.1 im
Weichenantrieb und verschließen Sie anschließend
das Gehäuse wieder.
2. Entfernen Sie den markierten Befestigungsring an der
Einkerbung mit einem scharfen Messer.
3. Bringen Sie die Weiche in die zum Antrieb passende
Stellung (Der Hebel des Weichenantriebs muss in den
Hebel der Weiche greifen).
4. Montieren Sie den Antrieb neben der Weiche (Abb.
10.2)undxierenSieihnmitdenpassendenDi-
stanzhülsen und Schrauben 2 x Nr. 13.
Märklin K-Gleis
Hebel: 8 und 10
Montage: oberur,nebenGleis
1. Montieren Sie die Hebel gemäß Abbildung 11.1 im
Weichenantrieb und verschließen Sie anschließend
das Gehäuse wieder.
2. Entfernen Sie den markierten Befestigungsring an der
Einkerbung mit einem scharfen Messer.
3. Bringen Sie die Weiche in die zum Antrieb passende
Stellung (Der Hebel des Weichenantriebs muss in den
Hebel der Weiche greifen).
4. Montieren Sie den Antrieb neben der Weiche (Abb.
11.2)undxierenSieihnmitdenpassendenDi-
stanzhülsen und Schrauben 2 x Nr. 13.
Tillig H0 Elite
Lever: 8 and 11
Mounting: Overground, beside the track
1. Mount levers 8 and 11 as shown in gure 10.1 into the
switch motor. After mounting the lever, close the cas-
ing with the cover.
2. Cut off the fastening ring at the notch with a sharp
knife as shown in gure 10.1.
3. Bring the turnout into the corresponding position of the
switch motor (the lever of the switch motor has to get
connected with the lever of the turnout).
4. Mount the switch motor beside the turnout as shown
in gure 10.2. Fix the switch motor with the screws 2 x
nr. 13. Use the distance rolls!
Märklin K-track
Lever: 8 and 10
Mounting: Overground, beside the track
1. Mount the levers 8 and 10 as shown in gure 11.1 into
the switch motor. After mounting the lever, close the
casing with the cover.
2. Cut off the fastening ring at the notch with a sharp
knife as shown in gure 11.1.
3. Bring the turnout into the corresponding position of the
switch motor (the lever of the switch motor has to get
connected with the lever of the turnout).
4. Mount the switch motor beside the turnout as shown
in gure 11.2. Fix the switch motor with the screws 2 x
nr. 13. Use the distance rolls!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4554 in the language / languages: English, German as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info