652076
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
Mot. / DCC
4554
Motorola
DCC
gelb
Digitalzentrale
braun
Adresse einstellen
grünes Kabel verbinden
rotes Kabel verbinden
rot
grün
/ yellow
Digital Command Station
/ brown
/ Set address
/ connect green cable
/ connect red cable
green
red
Fig. 15
Abb. 15
Damit ist der Weichenantrieb unter der neuen Adres-
se betriebsbereit. Falls Sie die Adresse künftig ändern
möchten, wiederholen Sie die Prozedur einfach.
Beachten Sie: Wenn Sie eine Zentrale einsetzen, die so-
wohl das DCC- als auch das Motorola-Format sendet, ist
die Programmierung des Weichenantriebs im DCC-For-
mat empfehlenswert.
Stellungsrückmeldung per Relais
Der Weichenantrieb verfügt über einen Transistor-Schalt-
ausgang zur Rückmeldung der Weichenstellung. Damit
kann er beispielsweise bistabile Relais schalten. Der
Kontakt wird jeweils am Ende des Stellweges der Weiche
für ca. 250 ms eingeschaltet.
Siekönnenüberdiese,alsLötächenausgeführten,Kon-
takte die Stellung der Weichenzunge an ein geeignetes
Steuerungssystem zurückmelden oder Schaltvorgänge
wie eine separate Herzstückpolarisierung auslösen.
Aufgrund der geringen Belastbarkeit und der kurzen
Schaltzeit nutzen Sie auf jeden Fall ein Relais wie z. B.
das Elektronische Relais von Viessmann (5552). Zum
Anschluss siehe Abbildung 16.
Stellungsrückmeldung per RailCom
®
Der Weichenantrieb sendet über RailCom
®
folgende In-
formationen an die Digitalzentrale:
► EigeneDigitaladresse
► BefehlsqittungmitAngabederSollstellung
6. Betrieb
Weichen schalten
Drücken Sie die entsprechende Taste auf dem Tasten-
stellpult (konventioneller Betrieb) oder senden Sie einen
entsprechenden Befehl an die Adresse des Weichenan-
The switch motor is now ready to be used with the new
digital address. If you want to change the address, you
just have to repeat the described procedure.
Notice: If you use a multiprotocol digital command sta-
tion, which is able to use the Motorola- as well as the
DCC-system simultaneuously, it is recommended to pro-
gram the switch motor on a DCC-address.
Feedback via relais
The switch motor is equipped with a transistor-driven out-
put, which is able to feedback the position of the turnout.
This output is used to operate bistable relais. The contact
is turned on for approx. 250 ms, when the turnout reach-
es it’s respective end position.
By these contacts (soldering pads on the back of the cas-
ing), you may feedback the position of the turnout to a
suitable control system. The second use is to switch the
polarisation of the core of a turnout.
Due to the low maximum load of the contacts and the
short pulse length, it is important to use a relais (e. g. the
Viessmann Electronic Relay 5552) as shown in gure 16.
Feedback via RailCom
®
The switch motor sends via the RailCom
®
protocol the
following information to the digital command station:
It’s own digital address
a receipt with the requested turnout position
6. Operation
Operate turnouts
Press the appropriate button on the push-button-panel
(conventional use) or send an appropriate request / order
to the address of the switch motor (digital use).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4554 in the language / languages: English, German as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info