529135
9
Zoom out
Zoom in
Previous page
1/15
Next page
7
Using the remote control
This section provides information on using the remote control. The infrared remote control provides access to the main functions of your DRX-602ES
and also advanced facilities such as presets and dynamic range control. Before using your remote, insert the supplied batteries. Aim the remote
control at the sensor on the display panel on your DRX-602ES.
Buttons (1-9) and the STORE button enable you to store your favourite radio services for easy access.
To store a service
While listening to the service you want to store.
1. Press the STORE button. The display on your DRX-602ES shows PRESET_ _?
2. Press the number (from 1 to 99) under which you want to store the preset.
3. Press the SELECT button to confirm your selection.
To recall a previously stored service
Press the numbered button(s) under which you stored the service.
The DRC Dynamic Range Control button enables you to alter the dynamic range of the received audio (dependent on
broadcast material) by making the quieter sounds in a broadcast more audible. This may be useful in noisy
environments or particularly quiet parts of programmes.
Press the DRC button to check whether DRC is available for the current service then press the DRC button again to
toggle DRC on or off. The default setting is off.
Press the DISPLAY button and repeat or hold down to cycle through the four display options.
This button performs the
same function as the Display button on the main unit. See Using your DRX-602ES: Changing the display for details.
The INFO button enables you to change the information mode on your DRX-602ES. This button performs the same
function as the Info button on the main unit, see Using your DRX-602ES: Viewing extra information for details.
Press the INFO button and repeat or hold to view the two information modes.
The !" and SELECT buttons enable you to cycle through and select services. Together, these buttons perform the
same function as the large tuning button on the main unit, see Using your DRX-602ES: Selecting a service for details.
1. Press and release or hold the ! or " button to cycle through the stored services.
2. The bottom line of the display on your DRX-602ES shows the service names.
3. Press the SELECT button to select and listen to the displayed service.
The PRI/SEC button enables you to select between the primary and secondary services where secondary services are
available. If a secondary service is available for the current service, the Secondary LED will light up on the front of your
DRX-602ES. Press the PRI/SEC button and repeat or hold to cycle through the available services. For an explanation
of primary and secondary services, see Guide to Digital Radio.
The MUTE button is a quick way of reducing the output volume from your DRX-602ES.
1. Press the MUTE button to mute the sound. The display on your DRX-602E shows MUTE.
2. Press any key on the remote control or main unit to return to the previous listening volume.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Videologic DRX-602ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Videologic DRX-602ES in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Videologic DRX-602ES

Videologic DRX-602ES User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info