785231
4
Zoom out
Zoom in
Previous page
1/8
Next page
Last update: 2018-10-16 22:32 vebus_smart_dongle_manual https://www.victronenergy.com/live/vebus_smart_dongle_manual
https://www.victronenergy.com/live/ Printed on 2018-10-17 04:45
Function Minimum Multi
firmware version Note
Input current limit and on/off/charger only
control 415 Not supported when a DMC
and/or VeBus BMS is installed
LED Status codes
Ve.Bus Smart has two LEDs: a Bluetooth status LED (blue), and an Error LED (red).
On power-up, the Bluetooth LED will be slow-blinking - indicating that the device is ready to accept a
Bluetooth connection.
If both LEDs remain illuminated, something is wrong with the Ve.Bus Smart unit (Hardware error).
When the LEDs are alternating quickly for more than 30 seconds, the Ve.Bus Smart is in firmware
update mode and will need to complete the update before it can be used. Firmware updates are
performed (where necessary) after connecting to VictronConnect.
Blue LED Red LED Ve.Bus Smart dongle
state Connection State Remark
On On Not functional Disabled
Hardware error.
Ve.Bus Smart will not be
visible in VictronConnect
and
it will not transmit battery
temperature and voltage
data to the Multi
Slow blinking Off Operational Not connected
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron VE.Bus Smart Dongle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron VE.Bus Smart Dongle in the language / languages: English as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info