785231
3
Zoom out
Zoom in
Previous page
1/8
Next page
2018-10-17 04:45 3/8 VE.Bus Smart Dongle - manual
Victron Energy - https://www.victronenergy.com/live/
Connect the red connection wire to the B+ input on the connection block1.
Connect the black connection wire to the B- input on the connection block2.
Connect the two eyelets to your battery terminals. Red wire eyelet on bat+ , black wire eyelet3.
on bat-
For battery temperature sensing, mount the dongle on or near the battery using the dongle's4.
adhesive mounting. If mounted near the battery, screws can be used.
Plug the connector block into the dongle.5.
Connect the dongle to the Multi's Ve.Bus interface, using a standard RJ45 UTP cable6.
Installation with battery terminal temperature sensor:
The battery temperature sensor replaces the included red battery(+) connection wire.
Connect the temperature sensor's red connection wire to the B+ input on the connection block1.
Connect the temperature sensor's black connection wire to the T- input on the connection block2.
Connect the black connection wire to the B- input on the connection block3.
Connect the two eyelets to your battery terminal. Red wire eyelet on bat+ , black wire eyelet on4.
bat-
Mount the dongle on or near the battery using the dongle's adhesive mounting. If mounted near5.
the battery, screws can be used.
Plug the connector block into the dongle.6.
Connect the dongle to the Multi's Ve.Bus interface, using a standard RJ45 UTP cable7.
System requirements
Multi firmware versions before 415 are not supported
Function Minimum Multi
firmware version Note
Battery voltage and temperature sense 419
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron VE.Bus Smart Dongle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron VE.Bus Smart Dongle in the language / languages: English as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info