785457
9
Zoom out
Zoom in
Previous page
1/27
Next page
2018-08-21 11:59 9/27 Color Control GX manual
Victron Energy - https://www.victronenergy.com/live/
see 1.2.2 above for instructions.
1.2.6 VE.Can Resistive Tank Sender Adapter
See its page and manual on our website for details about the Adapter.
To connect a product with a VE.Can port, use a standard RJ45 UTP cable.
Don't forget to terminate the VE.Can network on both ends using a VE.Can terminator. A bag with two
terminators is supplied with each VE.Can product. They are also available separately
(ASS030700000). (Available with straight or elbow connectors.)
Make sure that the canbus is powered, see the Power chapter in the Tank Sender Adapter manual for
details.
1.4.7 NMEA Tank senders from other manufacturers
A tank sender must meet the following requirements to be visible on the CCGX:
Transmit the NMEA2000 Fluid Level PGN, 127505
The NMEA2000 device class needs to be 'General', 80
The NMEA2000 function class needs to be 'Transducer', 190
For some tank senders it is also possible to configure the capacity and the fluid type from the CCGX -
for example the Maretron TLA100. This facility may be available with other senders made by other
manufacturers - it's well-worth trying.
To connect an NMEA2000 network to the VE.Can port on the CCGX, use a VE.Can to NMEA2000 cable.
Alternatively, instead of a VE.Can to NMEA200, you can use a 3802 cable from Oceanic Systems:
https://osukl.com/ve-can-adaptor/. The difference is that it lends itself well to connecting a single
NMEA-2000 device into a VE.Can network. It's also able to power a lower voltage NMEA-2000 network
directly from a 48V Victron system.
1.5 Measuring PV Inverter output
Measuring the output of a PV Inverter will provide the user with an overview of both actual power
balance and the energy distribution. Note that these measurements are only used to display
information. They are not needed, nor used, by the installation.
There are several ways to show the output of a PV Inverter:
An AC Current Sensor, wired to the analog inputs of a Multi or Quattro provides the information1.
at the lowest cost - though it is the least accurate. AC Current Sensor Manual.
Fronius PV Inverters can be read digitally via the local LAN. See the CCGX / Fronius manual.2.
Using an Energy Meter, either wired to the CCGX, or connected wirelessly using our Zigbee to3.
USB/RS485 interfaces. See the Energy Meters start page.
By using Wireless AC sensors. See the Wireless AC Sensor manual.4.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Color Control GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Color Control GX in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info